2 months of boost and BOOOOM !
#1
Registered User
Thread Starter
Join Date: Jul 2012
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
2 months of boost and BOOOOM !
Long story short, was out the other night just idling in a parking lot, I go to inch forward and the car stalls.... Im like wtf ...
crank it over it cranks twice and then stops dead as if it hit a wall, so much so I blew my main fuse for my battery relocation kit. (180amps)
anyways pulled the motor out, crank will not move, tore it down to a bare block, number 3-4 main bearing is scratched badly, the bearing however didnt move (spin) since the motor seized instantly, the oil pump is very hard to turn, the head looks to be in good shape.
so my question is ....
WHO IS VERY RELIABLE TO BUILD ME A BLOCK (forged pistons forged rods acl bearings new oil pump and block guard.
I priced everything on RSP website and Im looking right around 1500 bux for the internal parts I want.
I was wondering if anyone had good/ great experience with anyone building a motor for them, my hp goals are right around 450whp.... nothing more....
I have supertech everything for my head sitting in my basement, (was planning on building a motor over winter anyways)
just need someone to supply be a pre assembled short block with some quality stuff in side...I will do the rest.
anyone ?? suggestions ??
thanks !!!
-Lee
crank it over it cranks twice and then stops dead as if it hit a wall, so much so I blew my main fuse for my battery relocation kit. (180amps)
anyways pulled the motor out, crank will not move, tore it down to a bare block, number 3-4 main bearing is scratched badly, the bearing however didnt move (spin) since the motor seized instantly, the oil pump is very hard to turn, the head looks to be in good shape.
so my question is ....
WHO IS VERY RELIABLE TO BUILD ME A BLOCK (forged pistons forged rods acl bearings new oil pump and block guard.
I priced everything on RSP website and Im looking right around 1500 bux for the internal parts I want.
I was wondering if anyone had good/ great experience with anyone building a motor for them, my hp goals are right around 450whp.... nothing more....
I have supertech everything for my head sitting in my basement, (was planning on building a motor over winter anyways)
just need someone to supply be a pre assembled short block with some quality stuff in side...I will do the rest.
anyone ?? suggestions ??
thanks !!!
-Lee
Trending Topics
#9
Registered User
Thread Starter
Join Date: Jul 2012
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
What's a new short block from Honda worth ??
And I doesn't need to be sleeved etc ... I figured since it was apart I'd throw some pistons and rods at it ....
Ill be calling laskey and ip tomorrow ......
-lee
And I doesn't need to be sleeved etc ... I figured since it was apart I'd throw some pistons and rods at it ....
Ill be calling laskey and ip tomorrow ......
-lee
#10
Registered User
Join Date: Oct 2011
Location: georgetown
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
Or maule pistons or how ever there spelled if u want any outher pistons u must be sleeved
Sent from my DROID RAZR using Tapatalk 2