***OFFICIAL*** San Diego Garage Sale Thread
#1
Thread Starter
Join Date: Feb 2008
Location: Northern San Diego, CA
Posts: 5,541
Received 0 Likes
on
0 Posts
***OFFICIAL*** San Diego Garage Sale Thread
I want to clean the Forum up since I have the opportunity to. I have been trying to do a new updated For Sale thread for the SD community for a while now.
Also I thought this should be pinned for easy access for the community. Thank you for your cooperation.
I would like to mention also a rule here. Please do not use this forum to sell your personal belongings. This is the reason this thread has been created. Your thread will be automatically be remove from the forum. No questions asked. I am trying to avoid any clutter or double post on the Forum.
As a site rule, you must be a member to post things for sale, I have not yet heard a complaint from the Mods yet but I am leaving the option open for anyone to post on the SD F/S thread.
If your wondering why your thread or post was locked or removed, check to make sure your membership is current. If you feel it has been removed from error, don't hesitate to send Braskee or TurboViper a PM about it!
-Gavin
-Brad
#2
FS: Recaro SP-A (Lightweight Carbon Kevlar Bucket) $1700 OBO
https://www.s2ki.com/s2000/topic/861786-fs-recaro-sp-a/
https://www.s2ki.com/s2000/topic/861786-fs-recaro-sp-a/
#4
Registered User
Join Date: Apr 2010
Location: San Diego
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
First Name: Daniel
Location: San Diego, CA
Contact: zippernaut@yahoo.com (checked regularly)
-----------------------------------------------------------------------------------------------------------------------------
Price: $200 FIRM Picked Up (Full 06 Suspension: Springs, struts, tophats)
Price: $100 FIRM Picked up (06 OEM Exhaust w/ Tips)
Price: $25 FIRM OEM Shift Knob (w/out locking nut)
Price: $40 FIRM Skunk2 weighted shift knob (w/ locking nut)
-----------------------------------------------------------------------------------------------------------------------------
Selling my OEM Exhaust off my '06 has a small dent on the left canister, exhaust will come w/ tips. Also have my OEM Suspension w/ low miles (42,8XX miles)..this will include the springs, struts, and tophats, ready to bolt on. I have an OEM leather wrapped shift knob w/out the locking nut in good condition. Also up for sale is my Skunk2 weighted shift knob (14oz) w/ retaining nut in excellent condition..cool think about the skunk shift knob is that it has a dark finish and retains the OEM shift knob look.Thanks for looking.
Location: San Diego, CA
Contact: zippernaut@yahoo.com (checked regularly)
-----------------------------------------------------------------------------------------------------------------------------
Price: $200 FIRM Picked Up (Full 06 Suspension: Springs, struts, tophats)
Price: $100 FIRM Picked up (06 OEM Exhaust w/ Tips)
Price: $25 FIRM OEM Shift Knob (w/out locking nut)
Price: $40 FIRM Skunk2 weighted shift knob (w/ locking nut)
-----------------------------------------------------------------------------------------------------------------------------
Selling my OEM Exhaust off my '06 has a small dent on the left canister, exhaust will come w/ tips. Also have my OEM Suspension w/ low miles (42,8XX miles)..this will include the springs, struts, and tophats, ready to bolt on. I have an OEM leather wrapped shift knob w/out the locking nut in good condition. Also up for sale is my Skunk2 weighted shift knob (14oz) w/ retaining nut in excellent condition..cool think about the skunk shift knob is that it has a dark finish and retains the OEM shift knob look.Thanks for looking.
Trending Topics
#8
Registered User
Join Date: May 2008
Location: San Diego, CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Victor
San Diego, CA
Contact through PM's
SOS Stage 2 Kit DBW Kit
Novi 1200 Blower
10 lb Pulley & 14lb Pulley & Belt
SOS Racing Heat Exchanger
Hondata FlashPro
ID1000
Used for 7,400 Miles
Still Currently on the car.
$4,600.00 Picked Up. Will ship at buyers expense.
Stage 2 Puddy Mod AP2 Differential
Stock 4.10 Gears
7,400 Miles - It should be way less because I had it built with the 4.77 gears and sent it back and had it done with the stock 4.10 gears. Ben can confirm on this information.
$800 + Your good condition Ap2 Diff. Firm on price since it's already low.
Pictures of differential being built. Ben takes pictures of all his work for his customers.
Copied from https://www.s2ki.com/s2000/topic/558...able-products/
"The rear is set up for N/A and low boosted cars.
It is rebuilt from the housing in starting with every part being cryogenically thermo cycled, then new pinion bearings and seals are used to assemble. There is a one piece PuddyMod solid steel sleeve used instead of an OEM crush collar. The solid sleeve is made of 10/20 mandrel steel, it is seamless and will not compress under heavy stress like the OEM can. Solid sleeves are used in high performance drag racing rear ends because they work. The PM sleeve is a custom made part to fit this rear, it is a one piece steel sleeve. The stock hardware is replaced with new 10.9 hardware. Backlash is set at 3 to 4 thousands giving a tighter gear to gear fit.
Full Blueprint assembly of rear using precision accuracy to better than factory tolerances.
Price for the standard PM Stage 2 rear is $1,560"
San Diego, CA
Contact through PM's
SOS Stage 2 Kit DBW Kit
Novi 1200 Blower
10 lb Pulley & 14lb Pulley & Belt
SOS Racing Heat Exchanger
Hondata FlashPro
ID1000
Used for 7,400 Miles
Still Currently on the car.
$4,600.00 Picked Up. Will ship at buyers expense.
Stage 2 Puddy Mod AP2 Differential
Stock 4.10 Gears
7,400 Miles - It should be way less because I had it built with the 4.77 gears and sent it back and had it done with the stock 4.10 gears. Ben can confirm on this information.
$800 + Your good condition Ap2 Diff. Firm on price since it's already low.
Pictures of differential being built. Ben takes pictures of all his work for his customers.
Copied from https://www.s2ki.com/s2000/topic/558...able-products/
"The rear is set up for N/A and low boosted cars.
It is rebuilt from the housing in starting with every part being cryogenically thermo cycled, then new pinion bearings and seals are used to assemble. There is a one piece PuddyMod solid steel sleeve used instead of an OEM crush collar. The solid sleeve is made of 10/20 mandrel steel, it is seamless and will not compress under heavy stress like the OEM can. Solid sleeves are used in high performance drag racing rear ends because they work. The PM sleeve is a custom made part to fit this rear, it is a one piece steel sleeve. The stock hardware is replaced with new 10.9 hardware. Backlash is set at 3 to 4 thousands giving a tighter gear to gear fit.
Full Blueprint assembly of rear using precision accuracy to better than factory tolerances.
Price for the standard PM Stage 2 rear is $1,560"