Wheel list that fits over spoon calipers...
#262
Originally Posted by MB,Oct 2 2010, 01:28 AM
How do you manage to run a Mase turbo in Norway? Thought all mods were illegal?
Evasive sent me the correct spacers that are hubcentric.
I have like 1mm clearance on my 17x7.5+50 ce28n with 10mm spacers. Should i add a 3mm for safty sake?
#263
Registered User
Originally Posted by Rdizzle,Jul 5 2010, 01:03 AM
Will OZ Ultraleggeras clear the Spoon monoblocks? They're 18x8 +48
I saw in the thread below that you'll need 2.125" to clear the caliper. Is this from the top of the rotor or closest to the hub? I only have about 2" at the hub.
https://www.s2ki.com/forums/index.php?showt...&#entry18599136
I saw in the thread below that you'll need 2.125" to clear the caliper. Is this from the top of the rotor or closest to the hub? I only have about 2" at the hub.
https://www.s2ki.com/forums/index.php?showt...&#entry18599136
#268
Originally Posted by markhs2,Nov 17 2010, 05:56 PM
Volk CE28 17x10 +50
Volk Ce28 17x10 +45
Will either of these clear Spoons?
If not do you know what size spacer is needed to give at least 3 to 5 MM clearance?
Thanks
Volk Ce28 17x10 +45
Will either of these clear Spoons?
If not do you know what size spacer is needed to give at least 3 to 5 MM clearance?
Thanks
#270
Registered User
Join Date: Jul 2006
Location: On a rock wall somewhere...
Posts: 3,019
Likes: 0
Received 2 Likes
on
2 Posts
About time I rejoin this thread. A number of years ago, I set out to create a wheel-fitment template similar to the one you find on Stoptech's site.
Today, I completed that project with a lot of lazy procrastination in between the time I started the project. I have proof of concept on my own brakes. The info-sheet done up for Work Wheels that I posted a long time ago was for the Spoon calipers, HOWEVER, it proved to be only a cross section of the middle of the caliper, and did not cover all the areas where clearance would be an issue. I did some reverse engineering and now have a printable PDF to scale, that can be cut out and placed inside any wheel desired to test fitment.
If anyone here knows how to post a PDF here, please PM me, and I will make this template free for public use. Secondary verification would be appreciated as well, as I'm the only one who's verified its proof of concept.
PROOF OF CONCEPT
TEMPLATE IN USE
Today, I completed that project with a lot of lazy procrastination in between the time I started the project. I have proof of concept on my own brakes. The info-sheet done up for Work Wheels that I posted a long time ago was for the Spoon calipers, HOWEVER, it proved to be only a cross section of the middle of the caliper, and did not cover all the areas where clearance would be an issue. I did some reverse engineering and now have a printable PDF to scale, that can be cut out and placed inside any wheel desired to test fitment.
If anyone here knows how to post a PDF here, please PM me, and I will make this template free for public use. Secondary verification would be appreciated as well, as I'm the only one who's verified its proof of concept.
PROOF OF CONCEPT
TEMPLATE IN USE