Unsuccessful Spacers Installation (pics included)
#11
If I were you, I'd sell these and get normal no-stud spacers to use with your existing extended-length studs.
That said, if you are tracking, I wouldn't use those studs as they obviously aren't ARP. If you're tracking, I recommend replacing those with ARP extended.
Do not cut the studs you have, you'll just weaken them.
That said, if you are tracking, I wouldn't use those studs as they obviously aren't ARP. If you're tracking, I recommend replacing those with ARP extended.
Do not cut the studs you have, you'll just weaken them.
So cutting the studs do indeed weaken them even though they're extended eh..
The wheels should sit parallel to the fenders with a -2 to -2.5 degree camber (according to a few forum members whom I asked)
Anyways, lever principle, 20mm spacers without integrated studs seem like a bit too much on the studs
If I am getting spacers without integrated studs, I'll get 15mm max
Right now I'm just researching if cutting up the studs will weaken their support, and so far I'm getting mixed answers
Thread
Thread Starter
Forum
Replies
Last Post