OK, the Enkei RPF1's in 17x9, +45 don't fit the rear of my car the way I like. They stick out a bit to far for my taste. I'm considering 17x8 front, +49 & 17x9.5, +55 rear SSR SP1's. These offsets will have the look I'm after but I'm concerned about the spoke of the wheel sticking out past the rim. I know with the higher offsets the wheels won't have the sunken or concave look to them but I don't want the spokes to stick out beyond the rim. Pictures of these wheels with the stated offsets would be great. Comments would be greatly appreciated.

 

i'm running 17x9 +60 and i still had to do a rear bumper tab relocation and roll the fenders with -2.25 camber in the rear. just putting in my 2 cents.

 

I'm at stock ride height but if I lower the car I'm prepared to do this.

 

What size tires? +60 shouldn't be any problem at all with 255/40-17s.

 

i have the sp1 same offset and size your looking for..im running 225-45 front and 255-40 rear im gonna have to roll my fenders in the rear since i dont want to run to much negative camber and they scrape i would most likely need to roll the front as well if i wanted to go lower im lowered about 2 inches btw spokes dont stick out ..let me know if u got other questions.. another thing that might help ..some people put 5mm spacers up front and i bought them thinking i was gonna need them but they run fine without the spacers..

 

I plan to run the same size tires. Can you send me a picture or two of the wheels front and rear. I'm reluctant to spend the money on SSR wheels until I know for sure there going look like I prefer.

 

pm has been sent to you...

 

PM returned. Please reply.

 

Same sizes. Lowered 1.5in. no roll, no flare. Rubs in the front only when doing a hard turn and hitting a bump.

UK alignment specs
225/40/18
265/35/18

 

Vader: What's kinda offset do you have on your SP1?