Wheels and Tires Discussion about wheels and tires for the S2000.
Sponsored by:
Sponsored by:

LM style wheels 18x8 18x9 et38 all around fitment?

Thread Tools
 
Old 01-23-2012, 01:36 PM
  #1  
Registered User
Thread Starter
 
warbucks's Avatar
 
Join Date: Dec 2011
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default LM style wheels 18x8 18x9 et38 all around fitment?

i recently just purchased a set of LM style wheels online and currently waiting for them to arrive,the company said that the wheels would fit on an s2k but after asking a few ppl they said they doubted the fitment...sizes are as follows (f)18x8 38 offset (r)18x9 38 offset....my question is if these wheels will fit without rubbing if i lower the car 2 inches? and if i do lower it(after rolling the fenders)what tire sizes should i use to avoid rubbing?thank you for any input possible
Old 01-23-2012, 01:54 PM
  #2  
Registered User

 
FISH22's Avatar
 
Join Date: Nov 2005
Location: Virgnia
Posts: 14,275
Likes: 0
Received 10 Likes on 9 Posts
Default

Camber and fender rolling will be your best friends.

The fronts should be pretty easy to fit. What tire sizes are you planning on running? With up to a 225 in the front, all you'll need is a good roll. But if you plan on running a 255 out back, you'll have to run a good amount of negative camber(atleast -3.0), have the fenders rolled completely flat, and trim a lot of the bumper away. Running a 215/245 setup would make things a lot easier.
Old 01-23-2012, 03:30 PM
  #3  

 
ryuken's Avatar
 
Join Date: Sep 2006
Location: Texas
Posts: 1,328
Received 4 Likes on 4 Posts
Default

I hope it works out for you and not end up like this guy here. His offsets are just a tad different from yours and maybe it's a different company but his spokes hit the rear calipers. https://www.s2ki.com/s2000/topic/896...-calipershelp/
Old 01-23-2012, 03:59 PM
  #4  
Registered User
Thread Starter
 
warbucks's Avatar
 
Join Date: Dec 2011
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

i was going to go 215/40/18 in the front and 235/35/18 in the rear for clearance so id have to use less camber...i might have to sell these as soon as i get them if theyre going to be too much work
Old 01-23-2012, 04:13 PM
  #5  
Registered User
Thread Starter
 
warbucks's Avatar
 
Join Date: Dec 2011
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

and they look to be the exact wheels to a T.....arghhh
Old 07-02-2012, 05:39 PM
  #6  
Registered User
 
adamjames6996's Avatar
 
Join Date: Nov 2011
Location: mass, ludlow
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey. Did these ever work out for you? With a 38 offset I don't think it should of been a prob. It's the 18 inch part I'm scared of
Old 07-02-2012, 06:09 PM
  #7  
Registered User

 
S2k007's Avatar
 
Join Date: Jan 2003
Location: Temecula, CA
Posts: 3,081
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by adamjames6996
Hey. Did these ever work out for you? With a 38 offset I don't think it should of been a prob. It's the 18 inch part I'm scared of
If you're using the correct tire profile then it doesn't matter if the wheel is 17 or 18 inches or any size, the overall diameter of the wheel/tire will be the same. It's the offset and tire width (which is related to wheel width) that determines whether you'll rub or not.
Old 07-03-2012, 06:20 AM
  #8  
Registered User
 
adamjames6996's Avatar
 
Join Date: Nov 2011
Location: mass, ludlow
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok, so the wheels I'm gonna get are 18x9 offset 38. 18x8 offset 38. Would a 225,40 18 work out for the rear? Idk to much about wheel stuff lol
Old 07-31-2012, 09:23 AM
  #9  
Registered User
 
Chanh55's Avatar
 
Join Date: Sep 2008
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default

What tire size did you end up with? Any updates?
Old 07-31-2012, 11:12 AM
  #10  
Registered User

 
RedCelica's Avatar
 
Join Date: Apr 2002
Location: Raleigh
Posts: 15,344
Received 95 Likes on 73 Posts
Default

Last active: Mar 11 2012 11:44 AM


Quick Reply: LM style wheels 18x8 18x9 et38 all around fitment?



All times are GMT -8. The time now is 03:27 AM.