alignment setup
11-14-2005, 11:45 AM
#1
Registered User
Thread Starter
Join Date: Nov 2002
Location: Monteagle, TN
Posts: 1,768
Likes: 0
Received 0 Likes
on
0 Posts
alignment setup
I know this has been posted many times, but search is down so your help is appreciated.
My02 is lowered 2 inches, with stock rims. Yokoham ES100 tires. Last time I got an alignment done, I told him to set everthing at or as closest possible to zero. That was a big mistake. I understand now that some camber/caster/toe is desirable. anyways, this time around I want it done right. With my current setup my car is too sensitive to bumps and holes on the road. A lot of bump steer. I mostly drive street, but aggressive on the turns. Long drives about once or twice a month, and occasional canyon runs. I would like to minimize tread wear, but still have good handing.
I live in the Inland Empire, so suggestions on both a shop, and alignment settings would be great. I thank you in advance for your help.
My02 is lowered 2 inches, with stock rims. Yokoham ES100 tires. Last time I got an alignment done, I told him to set everthing at or as closest possible to zero. That was a big mistake. I understand now that some camber/caster/toe is desirable. anyways, this time around I want it done right. With my current setup my car is too sensitive to bumps and holes on the road. A lot of bump steer. I mostly drive street, but aggressive on the turns. Long drives about once or twice a month, and occasional canyon runs. I would like to minimize tread wear, but still have good handing.
I live in the Inland Empire, so suggestions on both a shop, and alignment settings would be great. I thank you in advance for your help.
11-14-2005, 02:15 PM
#2
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
secretdonkey
S2000 Under The Hood
3
11-05-2005 11:39 AM