5Zigen FN01R-c
#1
5Zigen FN01R-c
17x7 +48 (no worries, this will fit), 17x8 +43 (this is where I'm concerned).
215/245 tires (AP2 sizes)
Mild fender rolling (no pulling or flaring).
UK-spec alignment (forget exactly, but about -1.2 deg front, -1.8 deg rear).
Suspension is Koni+RSR, so about 1'' drop F, 1.5'' R.
Will this still rub? Thanks
215/245 tires (AP2 sizes)
Mild fender rolling (no pulling or flaring).
UK-spec alignment (forget exactly, but about -1.2 deg front, -1.8 deg rear).
Suspension is Koni+RSR, so about 1'' drop F, 1.5'' R.
Will this still rub? Thanks
#7
Originally Posted by WyattH,Jul 8 2008, 06:41 AM
^ rubbed a little with what suspension and camber?
i dont want to go muchhhh past the UK spec. ill do a mild fender roll, too. rear dropped 1.5''.
i dont want to go muchhhh past the UK spec. ill do a mild fender roll, too. rear dropped 1.5''.
Trending Topics
#9
I agree with ap2 here... you may want to run a bit more camber to avoid rubbing. The 8 inch wheel really wont give that tire any stretch and may bulge just a little bit. It could present some issues under hard compression.
If you rub, I would just relocate the bumper tab, but I'm not sure if your looking to do this.
jim
If you rub, I would just relocate the bumper tab, but I'm not sure if your looking to do this.
jim
#10