So recently, I've come across a set of Enkei RPM2s for a hell of a deal. The specs are 17x9, with a +40 offset. Currently, my car is slightly lowered on Tanabe GF210 springs. Maybe 0.8 of an inch or so. I'd like to purchase these wheels, but I'm against fender rolling if I can help it. Most likely, I'll be running 255/40 in the rear, and 215-225/40 in the front.

With the barely lower than stock ride height, do I still need to roll fenders or can I get away with leaving them as is?

Thanks in advance.

 

You will still have to roll

 

you might be able to squeeze in some 215s up front but the rears are not gonna fly.

 

+1