just2fast4u

astig2k dont you have a set too? if you guys ever decide to sell let me know ASAP... you two are some lucky asses!

duff0000

BUMP

Anybody know if you can get away with a 255/40 on a 17x9 45 offset with just rolled
rears?

Also Silentdancer were you able to clear an BBK's with your 17x8 45s? im looking into getting some RG2's which have a friendlier spoke design for BBK's then the blitz 01's

SimpleMan

I picked up the same ones in +35 offset for my mr2

General Kratos

I would guess, Yes if I had to say so. I was barely rubbing with +47 on my CE28's with 255.

I'm gonna mount 255's on my Blitz 17x9 this friday.....I'll let you know when I roll my fenders to see if I'm rubbing still.

Steven2k

even without a drop?

i ask because i'll be getting my enkei pdf-1 which are 17x9 +45 in the rear.

ridestrt

its gonna depend on the brand of tire too. 235 falken azenis are as big as most other 245's

sund

I've got the Blitz Type 01 as well and it does rub just slightly with the stock RE050 in 245/40/17. I rolled it a little bit yesterday and I still need to drive it to see if it still rubs. I can see about a section of about 8 inches long and about 3-4mm wide where it rubs. I also shave the bumper a little and cut the washer into a "D" shape.

I'm dropped on Eibach/Koni's for reference.

BSeriouS

255 on a 9 +45 is pushing it. Depending on how low you are, you are going to have to run negative camber of about 3.5 and roll your rear fender + relocate the rr bumper tab.

BSeriouS

and the the OP, 245's will work if your stock height. after lowering, rolled fenders it highly reccommended. If you want to be lower, but do not want to roll your fenders, 235 is a nice stretch.

General Kratos

Dame....Now I'm starting to wonder if I should have went with 245 or even 235....