WTB Stock stuff, putting a car back to stock
01-20-2012, 05:11 PM
#1
Registered User
Thread Starter
Join Date: Feb 2010
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
WTB Stock stuff, putting a car back to stock
Need a few things, putting a car back to stock and realizing just how much stuff is missing. Parts needed are from an AP1, I'm located in Eastern Canada so will need items shipped. Let me know if you have anything as I don't want to buy everything new.
Stock airbox assembly
Evap vacuum tank and bypass solenoid and vacuum lines, this is the small box and valve attached to the airbox assembly
6 Propeller shaft bolts and three of the washers
Upper heater hose that goes from the upper pipe on the firewall to the intake manifold
Air pump assembly and all related hoses and aluminum piping.
Primary and secondary O2 sensors
Factory Key fob also if someone has one
Battery hold down parts.
If anyone has anything, the best way to contact is email, it goes right to my phone, email is drgracin(at)rogers.com
Thanks
Stock airbox assembly
Evap vacuum tank and bypass solenoid and vacuum lines, this is the small box and valve attached to the airbox assembly
6 Propeller shaft bolts and three of the washers
Upper heater hose that goes from the upper pipe on the firewall to the intake manifold
Air pump assembly and all related hoses and aluminum piping.
Primary and secondary O2 sensors
Factory Key fob also if someone has one
Battery hold down parts.
If anyone has anything, the best way to contact is email, it goes right to my phone, email is drgracin(at)rogers.com
Thanks
Thread
Thread Starter
Forum
Replies
Last Post