WTB hood and Silverstone bumper
03-26-2010, 07:16 PM
#1
WTB hood and Silverstone bumper
Edit: Pretty much done now, have the bumper and a few hood possibilities lined up-- thanks all
EDIT: Have a couple different hoods I'm looking at, unless someone has a Seibon MG or TS style they're selling I'm probably set there, really looking for the other two parts now.
Had a fender bender a few months ago and finally have a little money I can spend, looking for a hood and bumper.
Trying to avoid painting if I can, so preferably silverstone bumper and hood, also interested in CF hoods.
I have an 01, but doesn't rule out AP2 or after market bumpers, as long as fitment is good and I like the look.
Dry carbon and true JDM parts are out of my price range unless you're high/retarded
I'm in Atlanta/Fayetteville Georgia, so ideally looking for someone in the area, but if you're willing to ship I'm probably interested.
PM me what you have!
Thanks
Edit: Looking for front bumpers, my bad
Hoods: prefer Silverstone or CF, interested in OEM, Vented, aftermarket styles -- must be usable for a daily driver
Front Bumpers: OEM AP1, AP2 or aftermarket, preferably silverstone, nothing over the top.
Edit 2: Added another part, modified title
I believe the part number is 71140-S2A-010ZZ -- it is the flat metal piece that bolts into the frame at the front edge of the car, the bumper is bolted down into it where the bumper meets the hood. Mine is slightly indented, making bolting the bumper down difficult, so if anyone is doing a partout from a rear/side collision, I'm interested in that piece.
Thanks again!
EDIT: Have a couple different hoods I'm looking at, unless someone has a Seibon MG or TS style they're selling I'm probably set there, really looking for the other two parts now.
Had a fender bender a few months ago and finally have a little money I can spend, looking for a hood and bumper.
Trying to avoid painting if I can, so preferably silverstone bumper and hood, also interested in CF hoods.
I have an 01, but doesn't rule out AP2 or after market bumpers, as long as fitment is good and I like the look.
Dry carbon and true JDM parts are out of my price range unless you're high/retarded
I'm in Atlanta/Fayetteville Georgia, so ideally looking for someone in the area, but if you're willing to ship I'm probably interested.
PM me what you have!
Thanks
Edit: Looking for front bumpers, my bad
Hoods: prefer Silverstone or CF, interested in OEM, Vented, aftermarket styles -- must be usable for a daily driver
Front Bumpers: OEM AP1, AP2 or aftermarket, preferably silverstone, nothing over the top.
Edit 2: Added another part, modified title
I believe the part number is 71140-S2A-010ZZ -- it is the flat metal piece that bolts into the frame at the front edge of the car, the bumper is bolted down into it where the bumper meets the hood. Mine is slightly indented, making bolting the bumper down difficult, so if anyone is doing a partout from a rear/side collision, I'm interested in that piece.
Thanks again!
03-28-2010, 11:45 PM
#4
Registered User
![[APtwo]'s Avatar](https://www.s2ki.com/forums/customavatars/avatar90767_3.gif){kind=avatar}
Join Date: Oct 2008
Location: socal
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
I have an oem ap1 silverstone hood off a MY00. Link to thread is below. I'm not completely sure if I wanna ship it yet but I'll figure it out soon.
https://www.s2ki.com/forums/index.ph...pic=775647&hl=
https://www.s2ki.com/forums/index.ph...pic=775647&hl=
