looking 4 Trashed Crankshaft for test fit
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: Wilmington, DE
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
looking 4 Trashed Crankshaft for test fit
I'm looking for a trashed f20C crankshaft for a mock up in a conversion. I have the bare block but would like to find either:
1: a crankshaft to install (need to determine adapter plate dimensions for transaxle) - can be a total salvage part - I only need dimensions
2: specific dimensions if someone has a crank on the shelf - OD of flywheel mount and the dimension that the crank protrudes from the front of the block - I could have a dummy made up to mimick a crank with these numbers.
Thanks,
1: a crankshaft to install (need to determine adapter plate dimensions for transaxle) - can be a total salvage part - I only need dimensions
2: specific dimensions if someone has a crank on the shelf - OD of flywheel mount and the dimension that the crank protrudes from the front of the block - I could have a dummy made up to mimick a crank with these numbers.
Thanks,
#2
Registered User
Join Date: Oct 2006
Location: Westchester NY
Posts: 2,507
Likes: 0
Received 0 Likes
on
0 Posts
i have one that only spun one rod bearing. you could scoop it up for the dimensions then turn around and sell it? it should be good with slight machining on the one rod journal.
email me if you're interested.
berbs007@yahoo.com
email me if you're interested.
berbs007@yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post
honda9krpm
S2000 Under The Hood
0
12-15-2003 12:44 AM