hondata flashpro for ap1
#2
If you have a 2000-2005 you will need a Hondata Kpro, the USDM 2006+ uses a Flashpro.
https://www.hondata.com/kpro-s2000
https://www.hondata.com/kpro-s2000
The following users liked this post:
ro5ks (05-31-2017)
#3
I think you also need a new ECU to put the Kpro in. Does not appear to be an economical change but I have a FlashPro so may not have paid close attention to the cost of this. Appears to push $1700. Plus someone has to tune the car.
-- Chuck
This is a specially adapted ECU which allows the 2000-2005 S2000 to run from a RSX ECU. The engine crank and cam sensors must be changed to equivalent 2006-2007 parts - see below.The S2000 KPro includes a new or user supplied RSX (PRB) ECU adapted for the S2000, and a wiring harness for the crank and cam sensors. It does not include the Honda parts - see mechanical modifications below. All user supplied ECUs must be PRB A01-A12 and in perfect working order. We will not use any other ECUs for the S2000.
The following users liked this post:
ro5ks (05-31-2017)
The following users liked this post:
ro5ks (05-31-2017)
#5
If you have a 2000-2005 you will need a Hondata Kpro, the USDM 2006+ uses a Flashpro.
https://www.hondata.com/kpro-s2000
https://www.hondata.com/kpro-s2000
#6
The Hondata Kpro needs a "donor" Acura RSX ECU -- part No. PRB A01-A12 . You can furnish it and sent to Hondata or buy one of theirs. And you need some AP2 engine sensors. And someone to tune it.
-- Chuck
-- Chuck
#7
Thanks man. I appreciate the help. I'm currently waiting on all the parts to come in but I'm doing a k24/k20 swap. I can do all the engine work just fine. It's the electrical that's gonna be a struggle. Which is why I'm looking to figure this out.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ls/vtec
Archived Member S2000 Classifieds and For Sale
0
04-21-2017 07:09 PM