Lhung

I removed all 18 screws/bolts but then i cant seem to pull it off the hooks around the headlights. Do i just use pure force and pull it out or is there some trick to it?

this is so frustrating >=(.....

thanks for the help!
LEs

ElDumbassoGrande

I found this was a pain in the ass too but it helps to make sure the middle section of the fascia is un-clipped first. Also, try pulling the bottom corner out a little as you pull straight back. Once you get the angle of the dangle just right, it should just pop out.
Or you can just get a case of beer and a pry bar.

viNz86

Your car is still a virgin, once you start removing panels and parts things will come off easier haha

jav

^ Haha!

Chow-bot

true, once i took my Ap1 bumper off a few times it made it so much easier

viNz86

You should invest in one of these to help you remove tabs

Lhung

haha, not a virgin anymore >=D!
its took a while but it finally came out, hmm now the problem is.... how hard is it to put it back on ><!

Theres a tool just for removing clips? if it makes my life a whole lot easier i would def like to invest in one.

Thanks for the help!!

kenny_son

i hate those clips......zap straps FTW

Lhung

you can zap strap your front bumper? @@!~ where do you do that? haha

Lhung

you can zap strap your front bumper? @@!~ where do you do that? haha

Well it seems the bumper i got needs a bit of tampering but it looks like it'll fit decently at least. Im going to need to drill some holes on the bottom for the bolts though =\ (they have where to drill marked out though, shouldn't be too bad).