Genuine Honda Parts Thread
11-01-2013, 05:17 AM
#1771
Join Date: Oct 2013
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Can I also get a price for the o-ring for the water elbow that bolts to the inlet manifold, just below the egr valve, next to the water temp sender. And also the rubber seal for the IACV, thanks.
Thinking about it, at some point in the next month or two, I'll also need the rubber seal for the cam cover. Would it be more cost effective to get a top end gasket set?
(Still have to remove VTEC solenoid etc, so if that has any o-rings, most probably need one, along with the TCT o-ring. Also, checking the cam cover, it looks like the cam sensors may have had a slight weep at some stage, again, may need to look at fresh o-rings for them).
Thanks
Dave
Thinking about it, at some point in the next month or two, I'll also need the rubber seal for the cam cover. Would it be more cost effective to get a top end gasket set?
(Still have to remove VTEC solenoid etc, so if that has any o-rings, most probably need one, along with the TCT o-ring. Also, checking the cam cover, it looks like the cam sensors may have had a slight weep at some stage, again, may need to look at fresh o-rings for them).
Thanks
Dave
11-01-2013, 06:42 AM
#1773
UK Trader
Thread Starter
Can I also get a price for the o-ring for the water elbow that bolts to the inlet manifold, just below the egr valve, next to the water temp sender. And also the rubber seal for the IACV, thanks.
Thinking about it, at some point in the next month or two, I'll also need the rubber seal for the cam cover. Would it be more cost effective to get a top end gasket set?
(Still have to remove VTEC solenoid etc, so if that has any o-rings, most probably need one, along with the TCT o-ring. Also, checking the cam cover, it looks like the cam sensors may have had a slight weep at some stage, again, may need to look at fresh o-rings for them).
Thanks
Dave
Thinking about it, at some point in the next month or two, I'll also need the rubber seal for the cam cover. Would it be more cost effective to get a top end gasket set?
(Still have to remove VTEC solenoid etc, so if that has any o-rings, most probably need one, along with the TCT o-ring. Also, checking the cam cover, it looks like the cam sensors may have had a slight weep at some stage, again, may need to look at fresh o-rings for them).
Thanks
Dave
IACV gasket - 18781-PCX-000 £8
The cam cover gasket set comes with the cover caps and the gasket, spark plug seals are seperate.
The vtec solenoid gasket is on the website
Best thing is to email me on performance.parts@hendy-group.com for large orders as I can respond with pictures quicker than on the forum
Si
11-01-2013, 06:43 AM
#1774
UK Trader
Thread Starter
11-01-2013, 06:45 AM
#1775
UK Trader
Thread Starter
Originally Posted by MB' timestamp='1381734159' post='22826144
Here
#8 90161-SR3-000 14x107 x 2 RRP £11.29 each HPP £9.40 each
#9 90161-S2A-000 14x160 x 2 RRP £16.73 each HPP £13.99 each - out of stock -2 weeks ish.
#10 90162-S2A-000 14x130 x 2 RRP £13.02 each HPP £10.89
#11 90163-S2A-000 12x 202 x 2 RRP £18.59 each HPP £15.49 each
#12 90164-S2A-000 12x162 x 4 RRP £14.86 each HPP £12.45 each
Just noticed the #'s are not 100% same as the image I linked too! I'll email you a link to the one I have used in the quote above
No delivery charge to you via our normal Veysport arrangement
There you go
11-03-2013, 12:19 AM
#1776
Registered User
Join Date: Oct 2013
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Hi Si
Could you give me a price for a new PCV valve and the breather pipe that joins it and the induction pipe? (Pre-facelift MY01 if it makes a difference)
The S2000 started kicking out burnt oil last night and think the PCV needs to be replaced (85k and it's never been done!).
Cheers
Will
Could you give me a price for a new PCV valve and the breather pipe that joins it and the induction pipe? (Pre-facelift MY01 if it makes a difference)
The S2000 started kicking out burnt oil last night and think the PCV needs to be replaced (85k and it's never been done!).
Cheers
Will
11-03-2013, 01:53 AM
#1777
UK Trader
Thread Starter
Hello Will
Not a problem!
17130-PV3-013 VALVE ASSY., PCV RRP £39.72 for the Valve
17131-PCX-000 TUBE, PCV RRP £16.72 (ETA 22nd November)
95002-41200-04 CLAMP, TUBE (D12) £1.21 each (2 required)
Delivery by Royal Mail £3.95
I'll do the PCV on its delivered by Royal Mail for £35.95
The others (if you can wait) add an extra £16.95
Please paypal eshop@hendy-group.com along with with the part numbers you require.
Si
Not a problem!
17130-PV3-013 VALVE ASSY., PCV RRP £39.72 for the Valve
17131-PCX-000 TUBE, PCV RRP £16.72 (ETA 22nd November)
95002-41200-04 CLAMP, TUBE (D12) £1.21 each (2 required)
Delivery by Royal Mail £3.95
I'll do the PCV on its delivered by Royal Mail for £35.95
The others (if you can wait) add an extra £16.95
Please paypal eshop@hendy-group.com along with with the part numbers you require.
Si
11-04-2013, 03:03 AM
#1778
Hey mate, could i get a price on the following delivered to Limerick, Ireland.
Cheers,
Gerard
- 3l MTF
- Pollen filter
- Rear 2 exhaust mounts for 2001
- Demister relay
- 4 Oil filters
- 2 sets of gearbox & diff washers
- Sump gasket sealant (enough to do at least 2)
- Front brake disk screws (4)
- 4 bolts for spark plug cover
- Prop shaft bolts (gearbox side)
- 2 rear hub nuts
- Exhaust manifold gasket
Cheers,
Gerard
11-04-2013, 06:14 AM
#1779
Hi Si,
Can you get me a price for a couple of parts?
It is for the missus Honda Civic Type-S MY2005
Bumper clip PFKL772390
Rear light cluster PFKL506011
I got the part numbers from Lings, let me know if you need any more info.
Cheers,
Mark.
Can you get me a price for a couple of parts?
It is for the missus Honda Civic Type-S MY2005
Bumper clip PFKL772390
Rear light cluster PFKL506011
I got the part numbers from Lings, let me know if you need any more info.
Cheers,
Mark.
11-05-2013, 05:32 AM
#1780
UK Trader
Thread Starter
Hey mate, could i get a price on the following delivered to Limerick, Ireland.
Cheers,
Gerard
- 3l MTF
- Pollen filter
- Rear 2 exhaust mounts for 2001
- Demister relay
- 4 Oil filters
- 2 sets of gearbox & diff washers
- Sump gasket sealant (enough to do at least 2)
- Front brake disk screws (4)
- 4 bolts for spark plug cover
- Prop shaft bolts (gearbox side)
- 2 rear hub nuts
- Exhaust manifold gasket
Cheers,
Gerard
Hi Gerard,
I can source all that no problem - please email me directly with your full address and I will get a quote sent to you by reply.
Si