15% OFF Enkei Wheels (RPF1, NT03, COMPE, etc)
#26
#27
Hi there,
Might be a silly question, sorry if so:
What do you do guys with the bore diametre? I believe our s2k is 64.1 mm diametre and the enkeis seem to be 72 mm for the 17x8? Is there any sort of plastic ring to centre them?
Cheers
Might be a silly question, sorry if so:
What do you do guys with the bore diametre? I believe our s2k is 64.1 mm diametre and the enkeis seem to be 72 mm for the 17x8? Is there any sort of plastic ring to centre them?
Cheers
#28
Not silly at all, I just learned about this with my recent purchase of enkei wheels also. We call them spiggot rings here in the UK, they call them hub centric rings in the states. You can get them in both plastic or aluminium quite cheaply, both will do the job. The s2k front bore size is 70.1 and rear is 64.1 and the enkei's are actually 73mm. So you will need a pair of 73x70.1mm and also a pair of 73x64.1mm.
You will find them everywhere including ebay. I bought mine from Science Of Speed http://www.scienceofspeed.com/produc...ntering_rings/
Hope that helps.
You will find them everywhere including ebay. I bought mine from Science Of Speed http://www.scienceofspeed.com/produc...ntering_rings/
Hope that helps.
#29
Not silly at all, I just learned about this with my recent purchase of enkei wheels also. We call them spiggot rings here in the UK, they call them hub centric rings in the states. You can get them in both plastic or aluminium quite cheaply, both will do the job. The s2k front bore size is 70.1 and rear is 64.1 and the enkei's are actually 73mm. So you will need a pair of 73x70.1mm and also a pair of 73x64.1mm.
You will find them everywhere including ebay. I bought mine from Science Of Speed http://www.scienceof...entering_rings/
Hope that helps.
You will find them everywhere including ebay. I bought mine from Science Of Speed http://www.scienceof...entering_rings/
Hope that helps.
Thread
Thread Starter
Forum
Replies
Last Post