Mark this thread as Sold
Pos swap / part ex - Want Track focused Dampers
#11
Originally Posted by Paper Lawyer' date='Mar 20 2007, 07:21 PM
don't ask
https://www.s2ki.com/forums/index.ph...T&f=5&t=394875
https://www.s2ki.com/forums/index.php?showt...0&#entry9887076
#12
because, as you know I've already flagged.....
https://www.s2ki.com/forums/index.php?showt...dpost&p=9809687
https://www.s2ki.com/forums/index.php?showt...dpost&p=9809687
#13
Originally Posted by Paper Lawyer' date='Mar 20 2007, 08:20 PM
because, as you know I've already flagged.....
https://www.s2ki.com/forums/index.php?showt...dpost&p=9809687
https://www.s2ki.com/forums/index.php?showt...dpost&p=9809687
#15
Originally Posted by mikey k' date='Mar 20 2007, 08:41 PM
That's the same as my second link
#18
Originally Posted by mikey k' date='Mar 20 2007, 09:31 PM
Mine and PJL's are 12mm IIRC I'm aiming for 1.5" drop and have just exchanged my Nitron sports for Tracks to help!
#19
Originally Posted by Paper Lawyer' date='Mar 20 2007, 07:21 PM
I suspect Peter and I both have a 25mm drop Nigel. That's from the accurate data points of the wheel arches to the ground From memory, a stock 03 I measured was 770mm and we are 745mm.
#20
Those could have easily been the numbers Nigel. 670mm dropped to 645mm. However, the 03 I measured had the same measurements, front and back. Also the case on a couple of S2000s I measured at the local dealership. This was the thing that threw me originally (and the reason for the front being so low in the photos I post of my polished car when I first had the Nitrons on) - I could only remember the OEM rear height and told Nitron to drop the front 30mm (using the wheelarches as data points) to keep the 30mm stagger....
I'm going to look for not more than a 10mm spacer for the steering rack
I'm going to look for not more than a 10mm spacer for the steering rack