Mark this thread as Sold
FS: K&N FIPK Gen II (Used)
#1
FS: K&N FIPK Gen II (Used)
For Sale is the K&N FIPK Gen II air intake that I purchased new from the US and installed in June 2008. Intake was removed last month and is boxed in its original packing.
Price:
Will be sold to the first person to PM me offering the asking price.
Earliest I can get it in the post is Monday 13th Sept.
Details and Condition:
The Air Filter has covered approx 20,000 miles. If you believe K&N cleaning is only required after 50,000 miles. If/when you clean it is up to you, I’m selling it in its current condition.
The Breather Hose has a rub mark from my bonnet, its less then 1mm wall loss, the wall is 3.5mm thick so it is not a problem. Would recommend you reduce the length of this hose to prevent the rubbing I got.
The 2 off, 4mm Vac hoses were also worn – I have replaced these with brand new silicon hoses for this sale.
The intake will fit all model years, however would be more suited to a MY06+ (DBW) as the intake is drilled to take the Intake Air Temperature Sensor. If you have a pre-2006 model it’s not a problem but you would need to buy a rubber bung to blank off the unused hole.
Installed:
Thanks, Gavin
Price:
- £160 Insured delivery within the UK only, standard parcel service (up to 5 days).
- £150 Collected from Chester Area (will even help you install it at my house if you wish).
Will be sold to the first person to PM me offering the asking price.
Earliest I can get it in the post is Monday 13th Sept.
Details and Condition:
The Air Filter has covered approx 20,000 miles. If you believe K&N cleaning is only required after 50,000 miles. If/when you clean it is up to you, I’m selling it in its current condition.
The Breather Hose has a rub mark from my bonnet, its less then 1mm wall loss, the wall is 3.5mm thick so it is not a problem. Would recommend you reduce the length of this hose to prevent the rubbing I got.
The 2 off, 4mm Vac hoses were also worn – I have replaced these with brand new silicon hoses for this sale.
The intake will fit all model years, however would be more suited to a MY06+ (DBW) as the intake is drilled to take the Intake Air Temperature Sensor. If you have a pre-2006 model it’s not a problem but you would need to buy a rubber bung to blank off the unused hole.
Installed:
Thanks, Gavin
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
T-Rex06
Archived Member S2000 Classifieds and For Sale
3
01-28-2011 02:42 PM
russellhq
UK & Ireland For Sale and Wanted
12
07-19-2010 08:12 AM