yellow box help
#12
Member
Ok, if you look on the diagram below its the connector plug with 32 wires in it. If you pull out the plug and look into the mouth of it, you want pin 9 which will be a blue and white wire. Should be on the top row.
MB
MB
#15
Registered User
Thread Starter
Join Date: Dec 2005
Location: united kingdom
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
guess i cut a wrong wire on my car! it seems to run fine at the moment. i better solder it back!
i've read through all of this:-
https://www.s2ki.com/forums/index.php?showtopic=300120
no mention of how to wire up the yellow box.
also found this:-
https://www.s2ki.com/forums/index.php?showt...851&hl=vss+wire
still no definite answers. i'm betting on the blue/whi wire.
i've read through all of this:-
https://www.s2ki.com/forums/index.php?showtopic=300120
no mention of how to wire up the yellow box.
also found this:-
https://www.s2ki.com/forums/index.php?showt...851&hl=vss+wire
still no definite answers. i'm betting on the blue/whi wire.
#17
Join Date: Dec 2001
Location: City Of London / Knebworth
Posts: 39,547
Likes: 0
Received 11 Likes
on
10 Posts
Originally Posted by nambiker,Mar 20 2006, 10:46 PM
still no definite answers. i'm betting on the blue/whi wire.
That is the one.
If you check my photo above you will see that I installed my yellow box right next to it.
#18
Registered User
Thread Starter
Join Date: Dec 2005
Location: united kingdom
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
thanks steven. i hear some people wiring the YB near to the ecu and it not working. Some say you have to wire it directly to the tranny. also without pictures its hard to tell what wire goes to the signal in or signal out.
#19
Registered User
Join Date: May 2005
Location: Perth, Australia
Posts: 6,661
Likes: 0
Received 0 Likes
on
0 Posts
If you need, download the RSM/VAFC manuals from www.apexi-usa.com
They'll show you speed/revs/throttle/pressure/vtec etc etc ..
They'll show you speed/revs/throttle/pressure/vtec etc etc ..