what colour is the socket/wires that fit into the HRW button on an 04+ car
#13
I believe if razorsharp192 shows the breaker the rear side photo of the 04 switch he will understand for sure which harness he is talking about
#14
Registered User
Thread Starter
Join Date: Apr 2004
Location: Manchester
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys, i've just emailed the guy that link to the pic, hopefully he can work out which plug i need from that pic just ordered a new centre console too, so the fun will begin soon trying to get the wiring sorted
#15
Does anyone know the consumption of the demister? (Watts etc), I'm about to make a harness that connects to a rocker switch from the 12v source under the dash and need to choose the appropriate thickness of wire. ALready have an inline fuse etc.
Has anyone else done this?
Also the hardtop has a 3 pin connector which ones are ground and positive?
Cheers
Has anyone else done this?
Also the hardtop has a 3 pin connector which ones are ground and positive?
Cheers
#16
Registered User
AJ, with the N/S panel off (one that you will be removing to fit the HT brackets), you can see which wires are which. IIRC, black is 12v and brown is gnd.
FWIW, my wires are the same thickness as these throughout
FWIW, my wires are the same thickness as these throughout
#17
Thanks, oh i was under the impression there was 3 wires . I'm just connecting bulldog connectors and cutting the plug off.
I could check the consumption with a multimeter, if the HRW is say 65watts You'd want a least 7amp gauge IMO. Just rather avoid a fire LOL.
I could check the consumption with a multimeter, if the HRW is say 65watts You'd want a least 7amp gauge IMO. Just rather avoid a fire LOL.
#18
Registered User
Thread
Thread Starter
Forum
Replies
Last Post