SCZ4

Guys,

I've removed my front and rear shock absorbers to fit Eiabch springs and also the front upper arms from the chassis to allow me to remove the shock absorber However, I can't see the relevant torque settings when searching on the forum... any ideas? Or just yank them up?

G

S2000_FUN

Taken from the service manual

Shock absorbers

Upper bolts of the shock absorber: 49 N.m (5.0 kgt.m,36lbt.ft)
Lower bolt of the shock absorber: 6 4 N m (6.5 kgl.m,47 lbf.ftl
brake hose mounting bracket : 22 N.m (2.2k gf.m,1 6lbf.ftl

Upper arms

flange bolts: 9.8 N.m (1.0 kgf m.7.2lbf.ft)
lock pin:49-59 N.m {5.0-6.0 kgt m, 36-4:l lbl ft}
flange bolts: 132 N.m {13.5 kgf.m,97.6 lbf.ftl

Hope it helps

Chris

SCZ4

Thanks Chris, sorted on the shock absorber. But still unclear as to the torque setting on the upper arm. I assume it's the flange bolt? It slides through the chassis, through the arm and bush and bolts into the nut welded onto the chassis lug??

S2000_FUN

These bolts are number 3 from my post above 132 N.m {13.5 kgf.m,97.6 lbf.ftl

I will try to find a link for you to download the service manual to have it

SCZ4

Thanks.

That would be very useful

S2000_FUN

Give me a minute and i will upload the photo

S2000_FUN

Here it is

lovegroova

This link to a service manual download might work: http://download.dailyfreeware.net/do...163a2804e615aa

SCZ4

Sadly not, but the picture is great

I can probably buy the manual on a DVD from ebay

lovegroova

Get it free from here: http://109.87.33.216...to/Honda/79.pdf (this one definitely works!)

Or see this thread https://www.s2ki.com/s2000/topic/991095-workshop-manual