Chris Type R

Nah Nick, this time I went the whole hog and did both Which reminds me, my calipers are due for another coat

AquilaEagle

D-OH went to fit mine just now - realised i ordered straight and not offset

ok so whats the secret to the side ones?

AquilaEagle

Found the secret - push forward, but with my sheer strength i broke the damn clip on the drivers side asked breaker if he has one from the broken S's

Chris Type R

[QUOTE]Originally posted by AquilaEagle
[B]Found the secret - push forward, but with my sheer strength i broke the damn clip on the drivers side

Chris Type R

My car looks like this now - well, kinda - actually, it has two gunk spots where the honda badges were. No amount of WD40 seems to be making an impact. Any suggestions ?

Tonky

The secret is to push a credit card under the front edge and push backwards towards the rear of the car, which bends the retaining clips back ......then ease the assembly out by pulling the front edge towards you. The credit card doesn't mark the paint.

Tonky

Chris.... try some Fairy Liquid... neat. That usually breaks down gluey residues. Let it soak well in, then rub with a sponge.

baptistsan

Autoglym tar remover.

AquilaEagle

[QUOTE]Originally posted by Chris Type R
[B]

Clear or amber ? I have a couple of spare ambers. Honda do the clear fittings for about 11 quid ea IRC.

Chris Type R

Will try this, & then some tar remover as a last resort.