Official MoT Thread
#21
Quick MOT question - headlamp washers - Fail if present and not working, what if they're removed but it's obvious it used to have them (hole in bumper) Is that a fail / advisory? Or fine?
#22
Registered User
Thread Starter
If present they must work.
If not present then it doesn't matter.
#23
Mine went through the MOT ok today, only a minor hiccup, I had not checked to see if the Bridgestone's were directional and had not replaced the wheels on the same sides I removed them from, so uncannily both front and rears going in the wrong direction, doh !!
And just an advisory on a little surface corrosion on rear brake pipes.
And just an advisory on a little surface corrosion on rear brake pipes.
#27
Originally Posted by jsh
Passed this am . No advisories and still 4mm on the rear tyres after 15k miles
#30
Originally Posted by jsh
Only managed 11k on MZ's <img src=/ponder2.gif' class='bbc_emoticon' alt='' />' /> Nothing wrong with Vtec solenoid <img src=/emot-tip-wink.gif' class='bbc_emoticon' alt='' />' /> Works every time at least twice a year <img src=/suspect.gif' class='bbc_emoticon' alt='' />' /> Sometimes 3 times during a Druid run . <img src=/driving.gif' class='bbc_emoticon' alt='' />' />
I managed 6k once. That set were definitely dry weather spec when they came off......