notchy gearbox
#22
Banned
Join Date: Mar 2009
Location: Kidderminster, GB
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by e130dan,Feb 19 2011, 11:09 AM
I just searched for "greasing release forks" and im going thinking of giving it a go.
But just to check, if i grease the release forks the notchy feeling from 2nd to 3rd gear should hopefuly go? im only asking because the "greasing release forks" thread is mainly for a sticky clutch .
But just to check, if i grease the release forks the notchy feeling from 2nd to 3rd gear should hopefuly go? im only asking because the "greasing release forks" thread is mainly for a sticky clutch .
#25
Originally Posted by r8byb,Feb 19 2011, 02:38 PM
Just high temp bearing grease from halfords
#26
I have the same problem, crunchy when cold then its fine after 15mins...
Honda have recommended that they change the gear box oil so i'll probably get this done and see how it is after that... Going to cost £80 tho, but worth a try i spose...
Honda have recommended that they change the gear box oil so i'll probably get this done and see how it is after that... Going to cost £80 tho, but worth a try i spose...
#28
I took the s for a drive today just to see if the notchy feeling goes after car is warmed up, after about an hour of driving it was still there (from 2nd to 3rd)
Im hopefully going to try and grease the release fork on the slave cylinder next weekend.
Also i had all my oils changed 3 weeks ago but im not sure what oil was used. But what oil did other people use to get rid of the notchy feeling?
Im hopefully going to try and grease the release fork on the slave cylinder next weekend.
Also i had all my oils changed 3 weeks ago but im not sure what oil was used. But what oil did other people use to get rid of the notchy feeling?
Thread
Thread Starter
Forum
Replies
Last Post