ICE, Halfords and Dash Controls
02-18-2009, 02:41 AM
#11
I use the halfords leads with a Kenwood radio in a 2002 car. The halfords leads work very well, but there is only one thing that won't work and that is to change radio channel with the CH button - it will instead search for the next channel as if you were tuning the radio. We had a thread on this a while back and I think it was confirmed that this is the case with all aftermarket radios including Sony.
02-18-2009, 03:34 AM
#12
Registered User
Thread Starter
Join Date: Feb 2009
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pasquale Bruno,Feb 18 2009, 02:41 AM
I used the halfords leads, and i have had no problem. I also have the idpod connection, the box is roughly the size of a fag packet one one cable connecting to the hu and one connecting to my ipod. I placed the box in the centre console underneath the sliding secret compartment then drilled a small hole in the 'glove' box and pulled the cable through. My ipod now sits in the glove box.
Hope this helps
Hope this helps
02-18-2009, 03:38 AM
#13
Registered User
Thread Starter
Join Date: Feb 2009
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Thanks all for the replies. I think I will go for the Halfords (partly because it is about 3 minutes from my house and I won't have to wait for anything and partly because I like to be able to take it back and give them grief if there are any problems).
02-18-2009, 03:40 AM
#14
Registered User
Join Date: Dec 2008
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
hth,
i didnt have to cut any wires, if you lift the centre console to put the box in there, when you put it back make sure to pull it towards the glove box for it to fit properly otherwise the hu cover does not come down properly.
Just got the sub to fit now and im happy
i didnt have to cut any wires, if you lift the centre console to put the box in there, when you put it back make sure to pull it towards the glove box for it to fit properly otherwise the hu cover does not come down properly.
Just got the sub to fit now and im happy
Thread
Thread Starter
Forum
Replies
Last Post