HKS SC kit topic
#1721
Anyone have a engine torque damper that fits with the HKS kit? my inlet pipe is connecting with the bolt on the side of the ABS.
Last edited by har-vey; 05-23-2017 at 04:47 AM.
#1723
#1725
#1726
i can see, but i have never removed the oil filter, and i have no idea how far it needs to be screwed out to remove it, i presume it screws onto a threaded spline or something? just thought it would be a fairly simple answer from others who have removed it, i know it is not possible to run a full sized filter when you have a sandwich plate
so unsure if you can remove the standard one with the hks pipe so close
so unsure if you can remove the standard one with the hks pipe so close
#1727
Originally Posted by Define198
i can see, but i have never removed the oil filter, and i have no idea how far it needs to be screwed out to remove it, i presume it screws onto a threaded spline or something? just thought it would be a fairly simple answer from others who have removed it, i know it is not possible to run a full sized filter when you have a sandwich plate
so unsure if you can remove the standard one with the hks pipe so close
so unsure if you can remove the standard one with the hks pipe so close
Given I will be doing this several times a year, the relocation was a no-brainer.
#1728
It can be removed and a replacement fitted by hand from underneath. Tightening it up with a strap was a total pita (I was on jacks not a ramp) and found I couldn't get the filter tool on the end to use a spanner. This just made me paranoid about it coming loose.
Given I will be doing this several times a year, the relocation was a no-brainer.
Given I will be doing this several times a year, the relocation was a no-brainer.
#1729
Undertray doesnt get in the way when doing it from underneath...
Make sure they put in 5w40 as anything else is not recommended by HKS.
I had to disconnect the pipe from the back of the charger so i could move it up to clear the filter.
Make sure they put in 5w40 as anything else is not recommended by HKS.
I had to disconnect the pipe from the back of the charger so i could move it up to clear the filter.
#1730
i am supplying them with castrol edge 5w40, which i do at every service, do you have a sandwich plate?