HEL Performance

Back on the truck and off to Mada Racing for more under bonnet work....

HEL Performance

The build is ALMOST there......plenty of 'faffy' jobs still to finish off but not long now. Plan is to get it testing by the end of September. Will be along with some more pictures of work which has been going on very soon...

zzkamikazezz

Is the rear wing being stabilised more at all, it looks like it will wobble a lot given how long and thin the supports are. Granted you don't have 1000bhp and go 350kph like this guy:
http://bridgetogantry.com/2/index.ph...e-nordschleife

MB

How much weight do you think was saved with the fuel cell over the OEM tank?

Any info on which one you fitted?

HEL Performance

Its having some X braces put on it yes, but in fairness the bracketry is pretty hefty already with 10mm thick ali used which bolts directly to the chassis.

HEL Performance

Its a 'Jazz' one from the US. Very light and foam filled. Not sure on the weight saving, one thing we didnt weigh but suppose we could do it still and compare.

HEL Performance

Rocker cover re-working and addition of the 3 breathers going to a catch tank which vents to atmosphere.







Cooling system block offs and coolant pipe mock ups...



Helmet....

AquilaEagle

Get it raced!

MB

Are you still selling GRP doors?

can you confirm the weight?

HEL Performance

We never went ahead with the mould in the end due to lack of interest/people willing to commit monetarily to taking a set.... So we just stuck with the carbon seibon's in the end....