GiffS2K

One control module and removing it will stop the warning light being lit.
(Section 23 of the workshop manual)

eSeM

Have you spoken to your insurance company about removing the airbag?

GiffS2K

I doubt theyd know how to do it

rob2.2

LMFAO

maz77

I removed the whole system today and the light is still on
both airbags, module and loom are out.
any ideas

GiffS2K

The schematic shows a feed from the SRS module, if the light is still showing then it must mean that the light is powered at the dashboard and earthed at the SRS unit once its checks are completed to actuate a circuit and turn off the light.
If that is the case it would be easier to just remove the warning light or connect pin 3 to pin 6 on the SRS 18 pin plug.