Aftermarket seats - What have you got?
#21
Member
http://www.sportseats4u.co.uk/
These guys are very helpful.
You have to be aware of the fitting issues though. The below refers to the XL size, i'm nut sure is eSeM had similar issues with the standard seats.
1) You will find getting the belt buckle clicked in tricky, unless you buy an extender and poke it through the seat hole - and the lap belt will be too high without the extenders
2) Fitting them is a bugger, and takes a real knack. I've done it a few times now. Rails go in first, loose, with side mount bolts loose, then fit the seat down in place, and bolt up
3) Buddy Club rails have been known to fail - I had extra welding done on mine
4) You will need to slot / file out the front left hole on the seat rail where it bolts to the floor, otehr wise the seat clashes with the centre tunnel and won't slide.
But it's worth the hassle.
These guys are very helpful.
You have to be aware of the fitting issues though. The below refers to the XL size, i'm nut sure is eSeM had similar issues with the standard seats.
1) You will find getting the belt buckle clicked in tricky, unless you buy an extender and poke it through the seat hole - and the lap belt will be too high without the extenders
2) Fitting them is a bugger, and takes a real knack. I've done it a few times now. Rails go in first, loose, with side mount bolts loose, then fit the seat down in place, and bolt up
3) Buddy Club rails have been known to fail - I had extra welding done on mine
4) You will need to slot / file out the front left hole on the seat rail where it bolts to the floor, otehr wise the seat clashes with the centre tunnel and won't slide.
But it's worth the hassle.
#22
Registered User
Thread Starter
http://www.sportseats4u.co.uk/
These guys are very helpful.
You have to be aware of the fitting issues though. The below refers to the XL size, i'm nut sure is eSeM had similar issues with the standard seats.
1) You will find getting the belt buckle clicked in tricky, unless you buy an extender and poke it through the seat hole - and the lap belt will be too high without the extenders
2) Fitting them is a bugger, and takes a real knack. I've done it a few times now. Rails go in first, loose, with side mount bolts loose, then fit the seat down in place, and bolt up
3) Buddy Club rails have been known to fail - I had extra welding done on mine
4) You will need to slot / file out the front left hole on the seat rail where it bolts to the floor, otehr wise the seat clashes with the centre tunnel and won't slide.
But it's worth the hassle.
These guys are very helpful.
You have to be aware of the fitting issues though. The below refers to the XL size, i'm nut sure is eSeM had similar issues with the standard seats.
1) You will find getting the belt buckle clicked in tricky, unless you buy an extender and poke it through the seat hole - and the lap belt will be too high without the extenders
2) Fitting them is a bugger, and takes a real knack. I've done it a few times now. Rails go in first, loose, with side mount bolts loose, then fit the seat down in place, and bolt up
3) Buddy Club rails have been known to fail - I had extra welding done on mine
4) You will need to slot / file out the front left hole on the seat rail where it bolts to the floor, otehr wise the seat clashes with the centre tunnel and won't slide.
But it's worth the hassle.
Very useful thanks.
They seemed to be the cheapest place I found.
#23
Join Date: Dec 2001
Location: City Of London / Knebworth
Posts: 39,547
Likes: 0
Received 11 Likes
on
10 Posts
1) You will find getting the belt buckle clicked in tricky, unless you buy an extender and poke it through the seat hole - and the lap belt will be too high without the extenders
2) Fitting them is a bugger, and takes a real knack. I've done it a few times now. Rails go in first, loose, with side mount bolts loose, then fit the seat down in place, and bolt up
3) Buddy Club rails have been known to fail - I had extra welding done on mine
4) You will need to slot / file out the front left hole on the seat rail where it bolts to the floor, otehr wise the seat clashes with the centre tunnel and won't slide.
2) Fitting them is a bugger, and takes a real knack. I've done it a few times now. Rails go in first, loose, with side mount bolts loose, then fit the seat down in place, and bolt up
3) Buddy Club rails have been known to fail - I had extra welding done on mine
4) You will need to slot / file out the front left hole on the seat rail where it bolts to the floor, otehr wise the seat clashes with the centre tunnel and won't slide.
2) First time I fitted them I had this problem but once everything is tightened up you should be able to remove/replace them just using the 4 bolts on the floor.
3) Bride rails are rock solid but not so easy to use. You don't really need a rail on the passenger side as the chances are the seat will rarely move.
4) Didn't have a problem with this but it mght be an issue with the new set of rails I will be installing soon.
and ....
5) The alacantra trim will wear out quite quickly on the seat bolsters and where the seatbelt passes over the shoulder of the seat.
6) Over time the seats fade quite badly, my black seats are now a grey colour.
7) If I was buing again I would get the Carbon P1 seats and get them re-covered before fitting them (just been on the website and I am very tempted .... )
Bucket seats ... the best mod you can make to the car!
#25
Best seats by far for the S2000 are ASM Recaro's at least one member has them on here, they look far better than Buddy club IMO.
Oh and one picture of an ASM Recaro in a girly GT3 just for good measure
Oh and one picture of an ASM Recaro in a girly GT3 just for good measure
#26
Member
They are very nice.
And probably do look better than BuddyClub, but I doubt they are much lighter. For the cost, i'm very impressed with Buddy Club seats, and i'm not easily pleased. I actually prefer them to the carbon buckets in the GT3
And probably do look better than BuddyClub, but I doubt they are much lighter. For the cost, i'm very impressed with Buddy Club seats, and i'm not easily pleased. I actually prefer them to the carbon buckets in the GT3
#29
Registered User
Join Date: Mar 2009
Location: London
Posts: 1,979
Likes: 0
Received 0 Likes
on
0 Posts
I think most of you guys will find the Japanese Recaro is pretty tight for your body shape, they are designed for Asian body shape.
Also they are about £2k each seat.
Also they are about £2k each seat.
#30
I've got a Recaro SPG-N as my drivers seat and it sure is a snug fit. I'm a 32" waist by the way