Texas - North Texas S2000 Owners North Texas S2000 Owners Club
North Texas Club

NTAXS Autocross #5, 10/15, TMS Bus Lot

Thread Tools
 
Old 09-28-2011 | 05:15 AM
  #1  
jrj512's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 515
Likes: 0
Default NTAXS Autocross #5, 10/15, TMS Bus Lot

North Texas Autocross Series (NTAXS)
Presented by the North Texas S2000 Owners Club (NTS2KOC)
Saturday, October 15th
Texas Motor Speedway Bus Lot
$40/driver entry fee.
Pre-register at http://www.dlbracing.com starting September 30th.
No on-site registration.
The event is limited to 65 drivers.

You get eight runs at NTAXS events, so you will make four runs in the AM session and four runs in the PM session, with a lunch break in between.

8 AM – 9 AM Check-in, Registration, and mandatory Tech Inspection
(You must arrive in time to check in and pass tech inspection prior to 9 AM)
8:15 AM – 9:30 AM Course open for walking
9:15 AM Novice Meeting (mandatory if new to NTAXS events)
9:30 AM Drivers Meeting (mandatory for all)
9:45 AM First car out
(lunch break between morning and afternoon heats)

Car Classing is based on engine size:
- Class 1/1R is for engines under 2.3 liters, except Honda S2000 and Lotus
Elise/Exige.
- Class 2/2R is for engines over 2.2 liters, but under 4.0 liters, plus Honda S2000.
- Class 3/3R is for engines over 3.9 liters, plus Lotus Elise/Exige.
- Class S2000 is only for Honda S2000 on street tires.

Rotary engine multiplies displacement by 2.0. Usage of forced induction multiplies displacement by 1.5. (This is in addition to the rotary multiplier, if applicable.) Tires with a wear rating under 140 must use the R class.

View the rules and additional information at http://www.s2000.org/nts2koc/autox.shtml.

Contact me at jrj512 at dfwmx5 dot com for more information.

You can now find us on Facebook at http://www.facebook.com/ntaxs.
Old 09-28-2011 | 06:58 AM
  #2  
Gernby's Avatar
Former Sponsor
 
Joined: Mar 2002
Posts: 15,526
Likes: 17
Default

WHOOP!
Old 10-01-2011 | 03:32 PM
  #3  
jrj512's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 515
Likes: 0
Default

Registration is open.
Old 10-03-2011 | 12:59 PM
  #4  
AATees's Avatar
Registered User
20 Year Member
 
Joined: Oct 2000
Posts: 1,006
Likes: 0
From: Tyler, TX
Default

In!

I shall catch you Mr. Temming! Gird yourself!

Regards,

Al
Old 10-04-2011 | 07:08 PM
  #5  
bmms8's Avatar
Registered User
 
Joined: Sep 2010
Posts: 467
Likes: 0
Default

more guys planned to go to this autocross? it looks like ill be free and i have missed the last few. I'm going to definitely try to make this one!
Old 10-06-2011 | 09:10 AM
  #6  
Gernby's Avatar
Former Sponsor
 
Joined: Mar 2002
Posts: 15,526
Likes: 17
Default

Registered!
Old 10-06-2011 | 07:41 PM
  #7  
Ddub-S2K's Avatar
Registered User
 
Joined: Oct 2009
Posts: 886
Likes: 0
From: Arlington, TX
Default

I'm in and registered.

Greg, my problem was indeed blown engine mounts (both driver and passenger side). I replaced them this past Tuesday and it purrs like a kitten again...sure beats the shaker it was during the second half of the last AutoX.
Old 10-07-2011 | 09:15 AM
  #8  
Gernby's Avatar
Former Sponsor
 
Joined: Mar 2002
Posts: 15,526
Likes: 17
Default

Originally Posted by Ddub-S2K
Greg, my problem was indeed blown engine mounts (both driver and passenger side). I replaced them this past Tuesday and it purrs like a kitten again...sure beats the shaker it was during the second half of the last AutoX.
Glad to hear that! Were you able to see the issue without removing them?
Old 10-07-2011 | 09:47 AM
  #9  
Ddub-S2K's Avatar
Registered User
 
Joined: Oct 2009
Posts: 886
Likes: 0
From: Arlington, TX
Default

Originally Posted by gernby
Originally Posted by Ddub-S2K' timestamp='1317955260' post='21047624
Greg, my problem was indeed blown engine mounts (both driver and passenger side). I replaced them this past Tuesday and it purrs like a kitten again...sure beats the shaker it was during the second half of the last AutoX.
Glad to hear that! Were you able to see the issue without removing them?
Once I shined a light down in there, you could see that the passenger side one was gone and it was harder to tell on the driver's side with all the hoses/lines that are in the way. I am just glad that was all the problem was. I still need to get a valve adjustment done at some point. Can you email me the "how to" along with the specs for the clearance?
Old 10-07-2011 | 04:00 PM
  #10  
tcjensen's Avatar
 
Joined: Dec 2005
Posts: 1,177
Likes: 3
From: McKinney, TX
Default

I need to make this one



All times are GMT -8. The time now is 02:53 PM.