Need a AEM EMS tuner in Dallas
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: Grand Prairie TX
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Need a AEM EMS tuner in Dallas
If you guys know anyone with a fair amount of experience with the EMS locally(DFW area) please let me know I need tuning on my 04 s2k
#2
I have some experience with two civics daily driven on AEM EMS, an ITR and my Vortech SC'ed B16. Mostly street tuned using Datalogging. I'd be happy to show you the basics of tuning.
The shops around DFW that either know how to use their dyno or have a dyno capable of loading to tune will rum between 100-150/hr.
Most shops will only do WOT pulls. For wot pulls there is a shop in the mid-cities area that usually offers 3 pulls for $30 on Saturdays.
The shops around DFW that either know how to use their dyno or have a dyno capable of loading to tune will rum between 100-150/hr.
Most shops will only do WOT pulls. For wot pulls there is a shop in the mid-cities area that usually offers 3 pulls for $30 on Saturdays.
#5
Wasabi Racing,
Carrollton, TX, (972) 380-5400;
Bobby Archer Motorsports
1033 N. Henderson St
Fort Worth, Texas 76107
(817)877-1772
Those are the first two that come to mind, and I believe Wasabi has a 4wd dyno. The guy that runs the dyno at Spedtek in Ft. Worth says he can do it, but I don't know if I believe him...
Hey fperra, I checked out your car at Dallas Market Hall, I was hoping to catch you to pick your brain on your setup. I bet that beast is a handful on the streets.
Carrollton, TX, (972) 380-5400;
Bobby Archer Motorsports
1033 N. Henderson St
Fort Worth, Texas 76107
(817)877-1772
Those are the first two that come to mind, and I believe Wasabi has a 4wd dyno. The guy that runs the dyno at Spedtek in Ft. Worth says he can do it, but I don't know if I believe him...
Hey fperra, I checked out your car at Dallas Market Hall, I was hoping to catch you to pick your brain on your setup. I bet that beast is a handful on the streets.
#6
Registered User
Join Date: May 2002
Location: Washington State
Posts: 3,178
Likes: 0
Received 0 Likes
on
0 Posts
It's quite a handful. And lots of fun. But there is still a lot of tuning and HP to go. Also, I'll be beefing up the drivetrain with an '04 transmission with cryo'd gears, aluminum driveshaft, cryo'd differential and high HP halfshafts. Hopefully it will be all done this summer. Stay tuned.
So, does Wasabi Racing have a loading dyno and are they familiar with the AEM?
So, does Wasabi Racing have a loading dyno and are they familiar with the AEM?
#7
I don't know how much they (wasabi) have they have worked with AEM, but they told me over the phone that they can load the dyno and hold it at whatever speed I wanted.
Of course they charge less if you tune it yourself..
Of course they charge less if you tune it yourself..
Trending Topics
#9
here is their website...
http://www.wasabiracing.com/
I haven't talked to anybody from that shop for 6 months or more...
http://www.wasabiracing.com/
I haven't talked to anybody from that shop for 6 months or more...