CMiS2K

I am selling the single outlet full titanium pipe and canister exhaust off the S2000. This exhaust is for sell to LOCAL owner's ONLY!

7-8 lbs total weight. 45 lbs weight loss i believe, you will have to have the car re-aligned because the balance will feel off from the weight loss. Sounds crazy, but trust me on it.

the pipe has been replaced 2 times, one time the resonator broke loose internally and the second time the welds around the resonator broke loose and the pipe cracked in half. I believe these were all design flaws, due to the fact that the original, replacement 1 and the newest one were all different. The mandral bends have changed. Anyway the new pipe has been on the car 45 days. It was not damaged in the accident. I paid $1122.00 shipped on the group buy from Evoultion(jeff) back in the summer.

I want $750.00 cash or I can take a pay pal credit card for the additional fee and convienence.

I have the stock exhaust to put back on, so no need to do a stock exhaust swap. The car and exhaust are at NE Paint and Body, buyer would have to pick it up there. The pipe and canister seperate easy and can fit in the front seat of the S.

The JIC suspension will most likely be completely replaced brand new and when it is, it will be new with a deep discounted price. I will need stock suspension swap + cash

I will be looking for roughly $1200.00 for the JIC suspension.

Also available and for sale right now will be:

Red Comptech STB with custom spacers to work with AEM CAI $135.00

Polished rear Cusco STB $50.00

Polished Spoon Rear Tie Bar $50

Diagrappa X-Bace black $150.00

RED anodized Ricks Billet Pulleys the newest design $200.00 these have been on the car for 45 days. 1 lbs 10 oz of rotation mass was lost with this set. Rev matching with eas is the most noticeable benefit.
MUZ/Whiteline 30mm sway bar $100.00

Temporarily being held for me by David(typesh) are ASA FR1's powder coated gun metal gray 17X8 front 48 offset and 17X9 rear 62 offset Khum V700's with 1-2 events left are already on the wheels. ASA's run $940 something i paid 375 for powder coating, this is a cosmetic feature and has nothing to do with performance. But the wheels were new and then powder coated immediately. There is a small bend on the inside of one of the 17X8, but the balance is not thrown off at all.

$1200.00 with tires.

I can take cash, check or pay pal for all items. I may entertain installments on the coil overs once available, wheels and exhaust. If I do, it will be in 2 payments and you must be trust a worthy person in order for me to consider it.

I think that is it for now.

Eventually once repaired under warranty the vortech SC to its entirety will be offered. The price of the unit will also include installation by me. I have installed 2 SC units and unistalled mine 1 time. I don't think there is anyone else in DFW that knows how to do this as well as I do. I will stand behind my performance of installation. I would suggest that anyone interested get the VAFC 2 and wiring harness, so that we can cut and splice the wiring harness and not the OEM like i did. You will need a VAFC because the standard FMU that vortech offers runs lean at a rising rate of 10:1. 12:1 is the next highest disk available and that may not be enough. I would also suggest upgrading and breaking the clutch in now. ACT HD00 and OEM disk could not hold 300 whp and 181 ftlbs. I will also be replacing the clutch once again.

I have determined with the assistance of someone else that is very well respected that the problems that I have had have not been related to the SC, but to (2) M-105 oil filters that deformed at the seal.

~Please consider the risk that you may take with installing any forced iduction application on to this car~


jgarcia@texasresidential.com

817-891-7276 cell
817-540-1692 ext 101 work

TypeSH

I am storing a set of CMiS2K's ASA FR1 wheels with Kumho Victoracer tires. These are the gunmetal powder coated ones that look fabulous on pretty much any color S2000. The wheels cost about $1k new and the powder coating was another $350 and the tires were another $600. He told me he wants $1500 shipped for these but if anyone local wants them I am sure he would discount that some. The tire sizes are 225/45/17 front and 255/40/17 rear. I should get a chance to take a picture of them this weekend and will post that link here.

CMiS2K

typesh,

since our discussion regarding the wheels and tires, i have come to the realization that $1200.00 would be the most competitive price i could offer to a local owner. add what ever shipping costs to that if you are not in the local area and have full cash ready to go.

Thanks,
Jeremy

SpeedxRacer

Can you send pics of the polished rear tie bar and the cusco rear stb to shingli2k@hotmail.com Thanks!

Clovis

Sent you a PM on the wheels.

starve

Does the canister on the JIC exhaust angle out, or does it come straight out?

CMiS2K

if properly hung it is straight out, no angle. The clamps are easy to adjust, so that you can get the pipe and canister to hang just right.

CMiS2K

to clarify something on the wheels


1) The tires are not shot, I have 3 events on these tires, 8 lapping sessions at TMS infeild 1.1 mile road course and 1 auto-x.
2) Bend or Blemish on one wheel(front), regardless it doens't affect the balance of the wheel and it is very small, it doesn't need to be repaired, it is also on the inside of the wheel and not visible at all. The powder coat was unaffected by it.
3) My cost of wheels $982 + $375 powder coating cost = $1357 rims with powder coat, wheels and tires are about 4 months old. Tires new were $660 out the door.

Thanks,
Jeremy

honda606

Jeremy,

Did you by chance receive the PM I sent you?

Ryan

CMiS2K

Ryan,
Got it and responded. I only have access to a computer at work during the week right now. I am moving and haven't got the DSL set up at the house yet.

If you want all three parts and can and will send all three parts ASAP. We can work out something on payment. Let me know what works for you.

At this time pictures of the parts are not available. I do not have a digital camera and the car is in the body shop.