inneedindeed

I'll pay in beer, cash, hookers!!!


I just really need this installed. If anyone can help

txt or call 4738678

thanks again

brent_strong

Are there some instructions online that I could look at? I wired my whole FD swap and it fired up no issues on the first try...I could probably handle this. I just want to see what I'd be getting into.

brent_strong

Looks simple. I'd do the wiring if you'll pull and reinstall the panels (just need to pull the door sill and the driver's kickpanel).

http://www.modifry.com/products/ect/install.htm

Do you have an alarm to use with it?

inneedindeed

i dont think i have the alarm. ill have to look in the bag. the guy gave me it when i bought the car. the kick panel is already off. but ill take anything else off i need to. i just hate to run around with out knowing temp. i mean we have checked it with the laptop and its been fine. just one of those things.

brent_strong

Ya definitely. I've been there before with my FD. I actually used a multimeter and the chart of resistance vs temperature for the temp sender to keep an eye on my temps...

I only want you to remove/reinstall your panels because I don't want to risk breaking any of your shit.

What's your schedule like this weekend? The only thing I have planned is the Predators game on Saturday.

inneedindeed

umm saturday its getting tinted at 830 then im taking the vette up there at 1:00 to get tinted. sunday the girlfriend is coming over. what i can do is the s2000 will be done around 9:30 so i should be able to meet you or we can do it at my place around 10:00ish as long as i can get back by 12:30 to take the vette in. thanks again. you want the money, beer or the hooker =)

brent_strong

If you'd be comfortable dropping it off at my place, that could work. I've got all my wiring setup ready to go.

The only payment I would want is a quick drive in it.

I'll send you a PM and we can figure it out.

inneedindeed

oh did i mention i have a kegorator on the porch and a margarita machine =)

inneedindeed

yea thats cool. i would say people would speak up if your not trust worthy ( i hope) teehee. i just really want it installed. i called a guy for a quote does that stuff and he said he was too busy. what do i need to bring other then the ect?

brent_strong

Nothing. Just the ECT...I have all the soldering stuff, shrink wrap, tape, etc etc. Wiring is kinda my thing.

I wouldn't drive the car without you around/in the car. Not a lot of people know me around here, but I've done business and stuff all over the internet without a single bad/unresolved issue. Lots of people would vouch for me on Rochester NY forums, but that doesn't help much.

I met you really quickly at the mod/maint day. I had the other BB S2000 there, it was up on jackstands getting brake/clutch fluid and coolant.