Tennessee S2000 Owners Tennessee - The Volunteer State.

Anyone else have this problem?

Thread Tools
 
Old 05-27-2005 | 09:44 AM
  #1  
MtnSmith's Avatar
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 22
Likes: 0
From: Kingston, TN
Default Anyone else have this problem?

All,

I have '04 Silverstone. The rear bumper seems to be separating from the body of the car.
If you look right below the rear taillights, where the bumper forms a triangle into the rest of the body, the tip of the bumper appears to be pulling away from the body, abut 1/4 of an inch now.
The dealer told me that this going to happen since the body is metal and the bumper plastic, and it is common to see on any S.
I think that is a bunch of CRAP, I have never seen another S, let alone any other Honda doing this.
Anyone else have the problem, it looks like S$&#!

Sorry I could not show pictures, I do not have the access on this post to load them up.

Any input is appreciated,

mTn Smith
Old 05-27-2005 | 01:47 PM
  #2  
Jamie6's Avatar
Registered User
 
Joined: Aug 2002
Posts: 246
Likes: 0
From: Maryville, TN
Default

I also think the dealer is full of crap! All S2000s are metal bodies and plastic bumpers but I haven't heard of this happening to anyone. Maybe you should check with a more credible dealership's service manager to get Honda to fix it.
Old 05-27-2005 | 02:18 PM
  #3  
Kaolinte's Avatar
Registered User
 
Joined: Mar 2002
Posts: 884
Likes: 0
From: Nashville
Default

I think 1/4" is excessive, but I have seen many S2000's with the same problem. Even S's that are sitting on the showroom floor. I will post a picture of mine for you to gauge.
Old 05-27-2005 | 02:28 PM
  #4  
jonam's Avatar
Registered User
 
Joined: Aug 2001
Posts: 199
Likes: 0
From: Knoxville
Default

so which dealership/service advisor would you guys recommend in EastTN area?
Old 05-31-2005 | 06:48 AM
  #5  
MtnSmith's Avatar
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 22
Likes: 0
From: Kingston, TN
Default

Thanks for the feedback.
I put in an official complaint with Honda America, maybe they can put a little pressure on the local people.
Take it back in next week and they will try to readjust it again and see what they come up with.
I agree with you Jamie, pretty much all cars now are metal and plastic. It has been kind of hard to drive lately without checking out every car I pass, just to see if they have the same problem, and I have not seen one yet. I am interested in seeing yours Kaolinte. I believe I have seen your car near where I work on Dutchtown Road, I might swing in sometime when I see it and check it out.
Don't be alarmed if you see me hovering near your rear bumper in the parking lot.


Thanks,

mTn Smith
Old 05-31-2005 | 08:02 AM
  #6  
Kaolinte's Avatar
Registered User
 
Joined: Mar 2002
Posts: 884
Likes: 0
From: Nashville
Default

Feel free to check it out.
Old 06-09-2005 | 06:23 AM
  #7  
MtnSmith's Avatar
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 22
Likes: 0
From: Kingston, TN
Default

Hey All,

Took my S back to Westside, and they fixed the bumper peeling away from the corner. Apparently there are a couple of clips that you can access if you remove the taillights that had come loose. So if you have this problem, it may be fixable, at least until it happens again.


See ya,

matin Smith

Trending Topics

Old 06-09-2005 | 07:35 AM
  #8  
Jamie6's Avatar
Registered User
 
Joined: Aug 2002
Posts: 246
Likes: 0
From: Maryville, TN
Default

At the top (beginning of) the Masters List of Smokey Mountain S2000 owners, Ron is listed. Ron was the Service Manager at West Side Honda. I don't know if he still is, or if he is still an S2000 owner, or if he is still looking at the board. He may not be around the board anymore because he obviously didn't input during any of these postings.

I am glad they fixed your car....
Old 06-10-2005 | 07:02 AM
  #9  
MtnSmith's Avatar
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 22
Likes: 0
From: Kingston, TN
Default

Ron is still the service manager, and I really appreciate his persistance in correcting this small defect that I had. I now have more faith in Westside and the service department, knowing that he took the time and corrected the imperfection.


mTn Smith
Old 06-25-2005 | 01:08 PM
  #10  
s2kvolfan's Avatar
Registered User
 
Joined: Mar 2005
Posts: 88
Likes: 0
Default

Originally Posted by MtnSmith,Jun 10 2005, 06:02 AM
Ron is still the service manager, and I really appreciate his persistance in correcting this small defect that I had. I now have more faith in Westside and the service department, knowing that he took the time and corrected the imperfection.


mTn Smith
Glad you got this worked out, I would have suggested Airport. They have been very good to me..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
batikan
S2000 Under The Hood
1
11-21-2005 04:35 PM
S11LMX
UK & Ireland S2000 Community
20
11-09-2005 05:59 PM
CmonLow
Texas - North Texas S2000 Owners
7
08-07-2005 09:48 PM
OC1515
S2000 Talk
8
06-27-2005 08:52 PM
xjohnx
Mid-Atlantic S2000 Owners
18
03-22-2004 12:46 PM




All times are GMT -8. The time now is 02:37 AM.