Mastermind NA

We have a set of 17 x 8 (+45) / 17 x 9 (+45) set of Regamasters in satin white ready next week. Price will be $1800 shipped. Let us know if you want this set.

-Rajeet@Mastermind

bouford

actually look*ing for a square set. pm sent!

Mastermind NA

actually looks for a square set. pm sent!
[/quote]

Just replied to your PM. Let us know.

Mastermind NA

We can re-powdercoat the faces to any standard color of your choice for an additional $350 (all 4 faces. This includes stripping, powdercoating, dis-assembly, and re-assembly.

Let us know.

Trustd_1

We can re-powdercoat the faces to any standard color of your choice for an additional $350 (all 4 faces. This includes stripping, powdercoating, dis-assembly, and re-assembly.

Let us know.
[/quote]

thanks, but i would prefer just to buy a set of wheels that i like & can use as is. repainting or powdercoating is like half a set of tires.

are the golds on both sets of LMs the same color code? not sure if it's the lighting, but the set hat you sold looks a little deeper gold. the one still available looks closer to champagne.

also, what kind of barrels & hardware (bolts) are you using to refurbish the wheels? i take it they're not BBS ones.

finally, what's the price difference on your wheels for pick up purchases?

Mastermind NA

We can re-powdercoat the faces to any standard color of your choice for an additional $350 (all 4 faces. This includes stripping, powdercoating, dis-assembly, and re-assembly.

Let us know.
[/quote]

thanks, but i would prefer just to buy a set of wheels that i like & can use as is. repainting or powdercoating is like half a set of tires.

are the golds on both sets of LMs the same color code? not sure if it's the lighting, but the set hat you sold looks a little deeper gold. the one still available looks closer to champagne.

also, what kind of barrels & hardware (bolts) are you using to refurbish the wheels? i take it they're not BBS ones.

finally, what's the price difference on your wheels for pick up purchases?
[/quote]

The gold on both sets is the same (factory from BBS). Difference in shades of gold you are seeing is due to the lighting. Only the lips have been redone by us. All barrels and hardware are also BBS parts

If you pick up the wheels, it will be $100 cheaper. So $1700 picked up.

Let us know if you have any other questions.

Thanks,
Rajeet

Trustd_1

We can re-powdercoat the faces to any standard color of your choice for an additional $350 (all 4 faces. This includes stripping, powdercoating, dis-assembly, and re-assembly.

Let us know.
[/quote]

thanks, but i would prefer just to buy a set of wheels that i like & can use as is. repainting or powdercoating is like half a set of tires.

are the golds on both sets of LMs the same color code? not sure if it's the lighting, but the set hat you sold looks a little deeper gold. the one still available looks closer to champagne.

also, what kind of barrels & hardware (bolts) are you using to refurbish the wheels? i take it they're not BBS ones.

finally, what's the price difference on your wheels for pick up purchases?
[/quote]

The gold on both sets is the same (factory from BBS). Difference in shades of gold you are seeing is due to the lighting. Only the lips have been redone by us. All barrels and hardware are also BBS parts

If you pick up the wheels, it will be $100 cheaper. So $1700 picked up.

Let us know if you have any other questions.

Thanks,
Rajeet
[/quote]


appreciate the additional info. reassuring to know all parts are authentic BBS. i just have a couple more questions:

for that particular set, how many of the wheels had lips that were repaired?
what was the extent of the damage?
how were they repaired? (machined, filler added/welded?)

what fender mods & tire combo is required to run these on my stock bodied ap2?
(i'm at stock height & will lower no more than 1-1.5" in the future. this is an important factor, as i will probably have to have the fenderwork done on the same trip that i pick the wheels up, so i can roll on the wheels home. i'd leave my stocks at a friends down there, temporarily.

the wheels are growing on me, but honestly, the offsets are scaring me a bit. i know they're not super crazy, but i really don't want to mess w/this car too much. again, i roadtrip the car often w/my gf.

thanks,

CL

Mastermind NA

We can re-powdercoat the faces to any standard color of your choice for an additional $350 (all 4 faces. This includes stripping, powdercoating, dis-assembly, and re-assembly.

Let us know.
[/quote]

thanks, but i would prefer just to buy a set of wheels that i like & can use as is. repainting or powdercoating is like half a set of tires.

are the golds on both sets of LMs the same color code? not sure if it's the lighting, but the set hat you sold looks a little deeper gold. the one still available looks closer to champagne.

also, what kind of barrels & hardware (bolts) are you using to refurbish the wheels? i take it they're not BBS ones.

finally, what's the price difference on your wheels for pick up purchases?
[/quote]

The gold on both sets is the same (factory from BBS). Difference in shades of gold you are seeing is due to the lighting. Only the lips have been redone by us. All barrels and hardware are also BBS parts

If you pick up the wheels, it will be $100 cheaper. So $1700 picked up.

Let us know if you have any other questions.

Thanks,
Rajeet
[/quote]


appreciate the additional info. reassuring to know all parts are authentic BBS. i just have a couple more questions:

for that particular set, how many of the wheels had lips that were repaired?
what was the extent of the damage?
how were they repaired? (machined, filler added/welded?)

what fender mods & tire combo is required to run these on my stock bodied ap2?
(i'm at stock height & will lower no more than 1-1.5" in the future. this is an important factor, as i will probably have to have the fenderwork done on the same trip that i pick the wheels up, so i can roll on the wheels home. i'd leave my stocks at a friends down there, temporarily.

the wheels are growing on me, but honestly, the offsets are scaring me a bit. i know they're not super crazy, but i really don't want to mess w/this car too much. again, i roadtrip the car often w/my gf.

thanks,

CL
[/quote]

Hey CL,

We've repaired all the lips on this set. The extent of the damage on this set was not severe so lips have been machined and high polished.

To run the reverse mounted faces it really depends on tire size, camber, and ride height. If you're looking to run reverse mounted faces and run like 215's in the front and 245's in the rear, you'll need to roll, and perhaps a slight pull, as well as run some negative camber. The other option is to run the faces top mounted to avoid many of these processes. All comes down to matter of preference.

Again, we can top mount the faces for you for no additional charge.

Let us know if you need any other info.

Thanks,
Rajeet@Mastermind

Mastermind NA

More sets will be up by next week!! Thanks for the patience.

Trustd_1

We can re-powdercoat the faces to any standard color of your choice for an additional $350 (all 4 faces. This includes stripping, powdercoating, dis-assembly, and re-assembly.

Let us know.
[/quote]

thanks, but i would prefer just to buy a set of wheels that i like & can use as is. repainting or powdercoating is like half a set of tires.

are the golds on both sets of LMs the same color code? not sure if it's the lighting, but the set hat you sold looks a little deeper gold. the one still available looks closer to champagne.

also, what kind of barrels & hardware (bolts) are you using to refurbish the wheels? i take it they're not BBS ones.

finally, what's the price difference on your wheels for pick up purchases?
[/quote]

The gold on both sets is the same (factory from BBS). Difference in shades of gold you are seeing is due to the lighting. Only the lips have been redone by us. All barrels and hardware are also BBS parts

If you pick up the wheels, it will be $100 cheaper. So $1700 picked up.

Let us know if you have any other questions.

Thanks,
Rajeet
[/quote]


appreciate the additional info. reassuring to know all parts are authentic BBS. i just have a couple more questions:

for that particular set, how many of the wheels had lips that were repaired?
what was the extent of the damage?
how were they repaired? (machined, filler added/welded?)

what fender mods & tire combo is required to run these on my stock bodied ap2?
(i'm at stock height & will lower no more than 1-1.5" in the future. this is an important factor, as i will probably have to have the fenderwork done on the same trip that i pick the wheels up, so i can roll on the wheels home. i'd leave my stocks at a friends down there, temporarily.

the wheels are growing on me, but honestly, the offsets are scaring me a bit. i know they're not super crazy, but i really don't want to mess w/this car too much. again, i roadtrip the car often w/my gf.

thanks,

CL
[/quote]

Hey CL,

We've repaired all the lips on this set. The extent of the damage on this set was not severe so lips have been machined and high polished.

To run the reverse mounted faces it really depends on tire size, camber, and ride height. If you're looking to run reverse mounted faces and run like 215's in the front and 245's in the rear, you'll need to roll, and perhaps a slight pull, as well as run some negative camber. The other option is to run the faces top mounted to avoid many of these processes. All comes down to matter of preference.

Again, we can top mount the faces for you for no additional charge.

Let us know if you need any other info.

Thanks,
Rajeet@Mastermind
[/quote]

thanks for all the info, Rajeet. i really would like to run reverses, but i'm not sure if i'm willing to have aggressive camber or pull the fenders. well, i'm not that averse to doing so, but my use of the car for long distance trips is a bit of a hindrance.

i'll have to mull it over a bit. i do like the LMs, but honestly, the gold color & offsets are making me a little hesistant. i'm also curious to see what other wheels you will be listing soon too.