Mark this thread as Sold
AP2v1 Wheels Staggered and Square setup - SOLD
07-09-2015 | 05:59 AM
#1
Thread Starter
Joined: Apr 2012
Posts: 863
Likes: 8
From: Guelph
AP2v1 Wheels Staggered and Square setup - SOLD
Selling my AP2V1 wheels, see attached pics. 
You can probably guess whose wheels I bought.
Only one wheel has a minor scuff, which has been polished out. The others are all good. Some of the clear-coat has come off on the edges, but they are 11 year old wheels after all.
I would rate them all as 9 out of 10.
Centre caps are included.
The front tires are Dunlop Z1s with about 50% wear left. There is some camber wear, mainly from track days. They are fine for street use.
The rear tires are Hankook RS3v2s with about 50% wear left. One of the tires has a plug from a nail. No issues with the plug. Again, these are excellent for street use.
$800 OBO.
Also, I have a PAIR of AP2V1 rears, bored out for the front, so you could go square on your set-up.
I bored these wheels on a vertical boring mill to a tolerance of + or - 0.001". They have a clearance of 0.01" on the front hubs, so they fit perfectly.
I will be selling the bored out PAIR of rears separately, as they are in demand for folks who track their S2Ks.
No tires on Square setup wheels.
$400 OBO
[attachment=82036:Front L closeup1.JPG]
[attachment=82037:Front L closeup2.JPG]
[attachment=82038:Front L.JPG]
[attachment=82039:Front R closeup1.JPG]
[attachment=82040:Front R closeup2.JPG]
[attachment=82041:Rear L closeup1.JPG]
[attachment=82042:Rear L closeup2.JPG]
[attachment=82043:Rear R closeup1.JPG]
[attachment=82044:Rear R closeup2.JPG]
[attachment=82039:Front R closeup1.JPG]
[attachment=82038:Front L.JPG]
You can probably guess whose wheels I bought.
Only one wheel has a minor scuff, which has been polished out. The others are all good. Some of the clear-coat has come off on the edges, but they are 11 year old wheels after all.
I would rate them all as 9 out of 10.
Centre caps are included.
The front tires are Dunlop Z1s with about 50% wear left. There is some camber wear, mainly from track days. They are fine for street use.
The rear tires are Hankook RS3v2s with about 50% wear left. One of the tires has a plug from a nail. No issues with the plug. Again, these are excellent for street use.
$800 OBO.
Also, I have a PAIR of AP2V1 rears, bored out for the front, so you could go square on your set-up.
I bored these wheels on a vertical boring mill to a tolerance of + or - 0.001". They have a clearance of 0.01" on the front hubs, so they fit perfectly.
I will be selling the bored out PAIR of rears separately, as they are in demand for folks who track their S2Ks.
No tires on Square setup wheels.
$400 OBO
[attachment=82036:Front L closeup1.JPG]
[attachment=82037:Front L closeup2.JPG]
[attachment=82038:Front L.JPG]
[attachment=82039:Front R closeup1.JPG]
[attachment=82040:Front R closeup2.JPG]
[attachment=82041:Rear L closeup1.JPG]
[attachment=82042:Rear L closeup2.JPG]
[attachment=82043:Rear R closeup1.JPG]
[attachment=82044:Rear R closeup2.JPG]
[attachment=82039:Front R closeup1.JPG]
[attachment=82038:Front L.JPG]
Thread
Thread Starter
Forum
Replies
Last Post
deepbluejh
Wheels and Tires
7
10-27-2014 12:45 PM
kennychiwa
The S2000 Gallery
8
11-11-2013 07:09 PM