Jinderv

Just wanted to mention, great deal on a superb jack. Most guys here already have one...but just in case. (This weekend only)



http://www.canadiantire.ca/AST/brows....jsp?locale=en

Holeecow

Need to get low profile jack!
thanks for the post!

Jinderv

No Prob! Its a awesome jack!

mlam81

damn, out of stock at a couple CTs that I checked out

afzan

4" minimum lift height might not be low enough if you're lowered..

this one goes lower, it goes on sale regularly for 99 http://www.canadiantire.ca/AST/brows....jsp?locale=en

mlam81

afzan, thanks for the tip !!

afzan

or you could also just use some pieces of wood />

I got the $99 torin from Costco, it only goes down to 3.9" so I have to use a few pieces of wood in the front to get to the front center jack point

hawkman199

Princess Auto has a similar jack, good for 1 1/2 tons and goes down to 3", on sale for $100 until November 26, it's aluminum and badged Goodyear Racing. The Canadian tires version goes down to 3 1/4" and misses fitting under my car by about 2mm. I have one of each.

http://www.princessauto.com/pal/prod...num-Floor-Jack

coolberg

I have the CT jack that Jinder posted info on. My AP2 is just a shade too low as well. Great jack though.

zeroptzero

I have a version of this jack but it is still not low enough to fit under the front center jack point of my ap1, and I am not lowered - oem stock height. I have a front lower oem lip which seems to prevent the jack from getting to the center front jack point. It works great on the side jack points and rear center jack point. It is a great jack though.