Mark this thread as Unsold
SOLD PLEASE DELETE
07-06-2010, 10:22 PM
#1
Former Sponsor
Thread Starter
SOLD PLEASE DELETE
Hey guys,
Up for sale is a pair of Sparco Torino 2 (http://www.sparcousa.com/pseats_street.asp?id=195) in red. These seats are in very good condition. I had them in the S for about 3000 miles. The rails are made by Sparco as well. The seats are *very* comfortable, and the side bolsters definitely hold you better in turns. They are no buckets, but I have taken it to autocross once and really like the extra lateral support. The driver seat also has an opening on the bottom for installing a 4 or 5-point harness.
If you were to buy these new, it would cost $600 for the seat itself, and about $180 for each rail. I am asking for $750 OBO for everything. NOW 550 FIRM
PM or post if you have any questions. I live in Long Beach, but I could meet you mid-way if you are serious about picking these up. You guys are welcome to stop by my tire shop to check them out.
Torres Tires
900 East 10th Street, Long Beach, CA 90813
Couple important things I need to mention:
1) The reclining knob on the side needs to be removed in order for the seats to fit in the S. You can still adjust the recline by turning the smaller plastic piece inside, but honestly it might be easier just leaving it in the same position.
2) The slider works without an issue, and you can simply transfer your oem seat buckle to the Sparcos.
3) The seat material is cloth.
4) They do not block access to the glove box.
5) I am unsure whether the passenger side will fit 06+ without modification due to the addition of the airbag sensor and revised mounting points (see thread:https://www.s2ki.com/forums/index.php?showtopic=437627)
6) If you are taller then 6'0 , i wouldn't recommend them as they do sit about 1' taller then stock. I am 5'11 and it wasn't a problem.
Sorry iphone picture
Pictures on the car
Up for sale is a pair of Sparco Torino 2 (http://www.sparcousa.com/pseats_street.asp?id=195) in red. These seats are in very good condition. I had them in the S for about 3000 miles. The rails are made by Sparco as well. The seats are *very* comfortable, and the side bolsters definitely hold you better in turns. They are no buckets, but I have taken it to autocross once and really like the extra lateral support. The driver seat also has an opening on the bottom for installing a 4 or 5-point harness.
If you were to buy these new, it would cost $600 for the seat itself, and about $180 for each rail. I am asking for $750 OBO for everything. NOW 550 FIRM
PM or post if you have any questions. I live in Long Beach, but I could meet you mid-way if you are serious about picking these up. You guys are welcome to stop by my tire shop to check them out.
Torres Tires
900 East 10th Street, Long Beach, CA 90813
Couple important things I need to mention:
1) The reclining knob on the side needs to be removed in order for the seats to fit in the S. You can still adjust the recline by turning the smaller plastic piece inside, but honestly it might be easier just leaving it in the same position.
2) The slider works without an issue, and you can simply transfer your oem seat buckle to the Sparcos.
3) The seat material is cloth.
4) They do not block access to the glove box.
5) I am unsure whether the passenger side will fit 06+ without modification due to the addition of the airbag sensor and revised mounting points (see thread:https://www.s2ki.com/forums/index.php?showtopic=437627)
6) If you are taller then 6'0 , i wouldn't recommend them as they do sit about 1' taller then stock. I am 5'11 and it wasn't a problem.
Sorry iphone picture
Pictures on the car
