Mark this thread as Sold
Sold! - FS: 2000 Honda S2000 GPW - Long Beach, CA - SOLD
04-02-2014 | 12:32 PM
#1
Thread Starter
Registered User
Joined: Jan 2009
Posts: 1,327
Likes: 0
From: Sunny Southern California
Sold! - FS: 2000 Honda S2000 GPW - Long Beach, CA - SOLD
Name: Adrian
Location: Long Beach, CA
Year & Model: 2000 Honda S2000
Description: Clean Title, GPW with black/red interior
Mileage:167,000
Price: 15,000 obo
Unfortunately I am selling my s2000. I am putting this ad up in here before putting it on Craigslist to give you guys dibs. I am hoping this car will land in good hands like how i took care of it. I am the second owner. Car has clean title and has been in a storage facility. I have been busy and just dont have time for it anymore. I drive it once a month if i have the time. I have the last 2 smog test results that will show the mileage driven in between them. Car was originally Berlina Black and I decided to change it to GPW back in 2010. Car was painted by JAT Autobody in El Monte, CA. Car runs strong with no problems. Engine is stock and is within OEM spec. It was never raced, tracked, launched, drifted or abused. I acquired the car bone stock and eversince i made some preventive maintenance and few mods which is listed below. I will not part it out. All parts listed are in new condition during the time i bought them in retail.
- OEM Hardtop
- OEM CR Lip
- OEM AP2 front bumper
- OEM AP2 tail lights
- Downforce Front Fenders
- J's Racing AP1 Rear Diffuser
- ASM Rear Overfenders
- Megan Racing Coilovers
- Mishimoto Aluminum Radiator
- Valve Job with New OEM AP2 Retainers, Bronze Valve Guides and Seals on the Engine Head by Portflow Designs done at 150,000 miles
- Cryo treated Final Drive 4.77 differential along with new seals and bearings installed by Kel at Evasive Motorsports done at 150,000 miles
- ACT HeavyDuty Pressure Plate with OEM Clutch Disc and ACT Prolite (8lbs) Flywheel installed by Alex at Ballade Sports done at 150,000 miles
- new OEM Clutch Master Cylinder and Slave Cylinder done at 150,000 miles
- SPC Camber Ball Joints Front and Rear
- Invidia Q300 with titanium tips catback exhaust
- Wheels - Advan RS 17x9.5 +35 front
- Advan RS 17x9.5 +15 rear
- Color: Gunmetal
- Shine side diffuser
- VIS Spoon style wing
- DJ Qube White LED Gauge
- Boston Acoustics Pro speakers
- Convertible Roof with rear Glass window installed instead of the original plastic ones that turns yellow.
Serious buyers only.
Test drive with cash in hand only and your car insurance.
Location: Long Beach, CA
Year & Model: 2000 Honda S2000
Description: Clean Title, GPW with black/red interior
Mileage:167,000
Price: 15,000 obo
Unfortunately I am selling my s2000. I am putting this ad up in here before putting it on Craigslist to give you guys dibs. I am hoping this car will land in good hands like how i took care of it. I am the second owner. Car has clean title and has been in a storage facility. I have been busy and just dont have time for it anymore. I drive it once a month if i have the time. I have the last 2 smog test results that will show the mileage driven in between them. Car was originally Berlina Black and I decided to change it to GPW back in 2010. Car was painted by JAT Autobody in El Monte, CA. Car runs strong with no problems. Engine is stock and is within OEM spec. It was never raced, tracked, launched, drifted or abused. I acquired the car bone stock and eversince i made some preventive maintenance and few mods which is listed below. I will not part it out. All parts listed are in new condition during the time i bought them in retail.
- OEM Hardtop
- OEM CR Lip
- OEM AP2 front bumper
- OEM AP2 tail lights
- Downforce Front Fenders
- J's Racing AP1 Rear Diffuser
- ASM Rear Overfenders
- Megan Racing Coilovers
- Mishimoto Aluminum Radiator
- Valve Job with New OEM AP2 Retainers, Bronze Valve Guides and Seals on the Engine Head by Portflow Designs done at 150,000 miles
- Cryo treated Final Drive 4.77 differential along with new seals and bearings installed by Kel at Evasive Motorsports done at 150,000 miles
- ACT HeavyDuty Pressure Plate with OEM Clutch Disc and ACT Prolite (8lbs) Flywheel installed by Alex at Ballade Sports done at 150,000 miles
- new OEM Clutch Master Cylinder and Slave Cylinder done at 150,000 miles
- SPC Camber Ball Joints Front and Rear
- Invidia Q300 with titanium tips catback exhaust
- Wheels - Advan RS 17x9.5 +35 front
- Advan RS 17x9.5 +15 rear
- Color: Gunmetal
- Shine side diffuser
- VIS Spoon style wing
- DJ Qube White LED Gauge
- Boston Acoustics Pro speakers
- Convertible Roof with rear Glass window installed instead of the original plastic ones that turns yellow.
Serious buyers only.
Test drive with cash in hand only and your car insurance.
Thread
Thread Starter
Forum
Replies
Last Post