Mark this thread as Unsold
Rolling Chassis/J's GT Widebody Kit
#1
Registered User
Thread Starter
Rolling Chassis/J's GT Widebody Kit
Name: Ameer
Location: OC, CA
Contact: PM please
Price: See below
2002 Honda S2000 AP1 Race Chassis
Vin# JHMAP11442T008738
Mileage: about 20,000 (no accidents-never been hit)
Price: $10,000
Stripped rolling chassis with no engine, transmission, driveshaft, LSD, axles, etc.
Factory OEM Hardtop from a 2005 AP2
Genuine J'S RACING Widebody Aero system Type GT FRP
Seibon Hood
Seibon Trunk
Custom Pro Aluminum Fuel Safe fuel cell 23"L x 16"W x 11"H (Rear trunk floor is cut out to fit this fuel cell)
Forgeline WC3R Wheels with Nitto NT555R 285/35 Front and Rear
Bolt Pattern 5 x 114.3
Center Bore 70.1mm
WC3R
Size: 18 x 11 +42 Fronts
18 x 11 +18 Rears
Finish: Brushed Center-Low Gloss Clear
Cap: ZX3R Cap with Brushed Emblem
Outer Rim Finish: Powder Coated Outer-Clear
Inner Rim Finish: Powder Coated Inner- Clear
Bolts: Stainless Steel Bolts-included with wheel
Details on the Fuel Cell:
Custom Pro Cell – 15 gallons
E85 fuel compatible
FAB100 Bladder
.063 Aluminum container with External Flange Lid 23”L X 16”W X 11”H
Custom collector with (3) CV100 check valves & directional fins and BPU10 Billet low profile pickup in Center Rear of Collector
SF6X10E-A Aluminum fill plate with -10 outlet, -8 return, -8 vent
Return to be plumbed into Collector w/bulkhead fitting
SUP120-90 sending unit installed
Yellow baffling foam
Retails for $3,000
What you see is what you get. PM any questions. Will throw in two Sparco seats as well. One Pro2000 (a little dirty but great condition) and one HANS version of the seat from Sparco. The car does not come with driveline and does not have headlights, AP1 taillights included and most of the interior will be included. Looking to move this thing fast so please any interest don't be afraid to make an offer. Parts are worth more than my asking price.
Location: OC, CA
Contact: PM please
Price: See below
2002 Honda S2000 AP1 Race Chassis
Vin# JHMAP11442T008738
Mileage: about 20,000 (no accidents-never been hit)
Price: $10,000
Stripped rolling chassis with no engine, transmission, driveshaft, LSD, axles, etc.
Factory OEM Hardtop from a 2005 AP2
Genuine J'S RACING Widebody Aero system Type GT FRP
Seibon Hood
Seibon Trunk
Custom Pro Aluminum Fuel Safe fuel cell 23"L x 16"W x 11"H (Rear trunk floor is cut out to fit this fuel cell)
Forgeline WC3R Wheels with Nitto NT555R 285/35 Front and Rear
Bolt Pattern 5 x 114.3
Center Bore 70.1mm
WC3R
Size: 18 x 11 +42 Fronts
18 x 11 +18 Rears
Finish: Brushed Center-Low Gloss Clear
Cap: ZX3R Cap with Brushed Emblem
Outer Rim Finish: Powder Coated Outer-Clear
Inner Rim Finish: Powder Coated Inner- Clear
Bolts: Stainless Steel Bolts-included with wheel
Details on the Fuel Cell:
Custom Pro Cell – 15 gallons
E85 fuel compatible
FAB100 Bladder
.063 Aluminum container with External Flange Lid 23”L X 16”W X 11”H
Custom collector with (3) CV100 check valves & directional fins and BPU10 Billet low profile pickup in Center Rear of Collector
SF6X10E-A Aluminum fill plate with -10 outlet, -8 return, -8 vent
Return to be plumbed into Collector w/bulkhead fitting
SUP120-90 sending unit installed
Yellow baffling foam
Retails for $3,000
What you see is what you get. PM any questions. Will throw in two Sparco seats as well. One Pro2000 (a little dirty but great condition) and one HANS version of the seat from Sparco. The car does not come with driveline and does not have headlights, AP1 taillights included and most of the interior will be included. Looking to move this thing fast so please any interest don't be afraid to make an offer. Parts are worth more than my asking price.
Thread
Thread Starter
Forum
Replies
Last Post
Junkno
S2000 Forced Induction
0
09-06-2016 02:16 AM