Mark this thread as Unsold
$old
#4
These are 25mm wider. I bought them from another member here, I've never installed them, my wheels are 17x9 45 and I have 255's. My driveway is a Monster, and I'm afraid I'd chew them up at my ride height. When I rolled my stock fenders I wasn't able to use any of the outer tabs for the liners anyway, so they're just trimmed and kinda floating in the wells. I don't think it would be any different with the shine fenders installed.
There is damage to the fiberglass, but very minimal, I was planning on dripping superglue inthe cracks myself and calling it good.
If you're really low, and have aggressive wheels AND tires, and you go into an ugly drive way at close to full lock you'll get contact.
There is damage to the fiberglass, but very minimal, I was planning on dripping superglue inthe cracks myself and calling it good.
If you're really low, and have aggressive wheels AND tires, and you go into an ugly drive way at close to full lock you'll get contact.
#6
As far as the fitment, I'll contact the feller I bought them from and see if it's ok to use some of his pics.
The fitment on these Shine fenders isn't quite like OEM, but it's far far better than what I've seen from say the Seibon fenders, which are only 10mm wider.
The fitment on these Shine fenders isn't quite like OEM, but it's far far better than what I've seen from say the Seibon fenders, which are only 10mm wider.