Mark this thread as Sold
FS: Tein RA Coilovers 2 sets SOLD
#1
Thread Starter
Registered User
Joined: Feb 2003
Posts: 6,245
Likes: 0
From: Everywhere and anywhere...
FS: Tein RA Coilovers 2 sets SOLD
These are "REAL" Used Tein RA Coilovers that have about 5500-6000 miles on them. Great condition will fit AP1 or AP2. Comes with all adjusters needed. FRONT Spring rate kgf/mm> 10 lbs/in> 599
REAR Spring rate kgf/mm> 10 lbs/in> 599
PM or call 818-266-6257 Rommel
ASKING $950.00 FIRM EACH SET of 4 JUST SOLD ONE SET, AND THE LAST SET PENDING TO Blue_AP2 today!!!
REAR Spring rate kgf/mm> 10 lbs/in> 599
PM or call 818-266-6257 Rommel
ASKING $950.00 FIRM EACH SET of 4 JUST SOLD ONE SET, AND THE LAST SET PENDING TO Blue_AP2 today!!!
#3
Thread Starter
Registered User
Joined: Feb 2003
Posts: 6,245
Likes: 0
From: Everywhere and anywhere...
Originally Posted by alfman240z,Sep 28 2009, 11:04 PM
why is "real" in quotations???
Trending Topics
#8
Thread Starter
Registered User
Joined: Feb 2003
Posts: 6,245
Likes: 0
From: Everywhere and anywhere...
thx for the bump and thank you guys for your patience.. here is a link to a known source that explain spring rates and anything you need to know..
http://www.jaydm.com/tein/typera.htm
http://www.jaydm.com/tein/typera.htm
#9
Thread Starter
Registered User
Joined: Feb 2003
Posts: 6,245
Likes: 0
From: Everywhere and anywhere...
TEIN Type RA Damper
TEIN Type RA Damper Kit Includes:
4 Adjustable Damper
4 Main Springs
4 Sub Springs
4 Lower Spring Seats
4 Spacer Spring Seats
8 Thrust Washer
4 Bump Rubber Pieces
4 Dust Boots
4 Pillow Upper Mounts
Damping Effect Adjustment Tool
Height Measuring Gauge
Instruction Manual
The TEIN technology for the advanced driver
Type RA TEIN suspension has adapted into its package, the specifications used in the rally field such as the World Rally Championship. TEIN has constructed a footwork for you which gives priority to function.
A high grade specification which gives you an unsurpassed drive feel.
Introduction of specifications used at competition levels.
Adopted a single rod structure for better reception between driver and road surface.
A linear damping effect which adapts to even the smallest road surface abnormality by adapting the single rod structure.
Seamless tube using a drawing method. Processing technology which enables a high level of precision up to 1/100mm of the inner diameter. Inner surface precision up to 3.2S (inner surface bumps within +/- 1.6 micrometer)
Use of ultra light and strong aluminum - A7050 which is also used in airplanes.
A I.D.45 piston which is maximum for marketed cars' shock absorber.
A different diameter multi-level valve structure which enables damping effect and specifications adjustment.
The damping effect adjustment structure uses an evolved version of the special shaped needle valve which has already been proven in the HA/NA dampers.
TEIN Suspension Type RA
The type RA allows you control to 1/1000 sec, and to 1 millimeter
S2000 00+ AP1 RA DSH64-P1LS1 10 559 10 559 W/Pillowball
Upper Mount
TEIN Type RA Damper Kit Includes:
4 Adjustable Damper
4 Main Springs
4 Sub Springs
4 Lower Spring Seats
4 Spacer Spring Seats
8 Thrust Washer
4 Bump Rubber Pieces
4 Dust Boots
4 Pillow Upper Mounts
Damping Effect Adjustment Tool
Height Measuring Gauge
Instruction Manual
The TEIN technology for the advanced driver
Type RA TEIN suspension has adapted into its package, the specifications used in the rally field such as the World Rally Championship. TEIN has constructed a footwork for you which gives priority to function.
A high grade specification which gives you an unsurpassed drive feel.
Introduction of specifications used at competition levels.
Adopted a single rod structure for better reception between driver and road surface.
A linear damping effect which adapts to even the smallest road surface abnormality by adapting the single rod structure.
Seamless tube using a drawing method. Processing technology which enables a high level of precision up to 1/100mm of the inner diameter. Inner surface precision up to 3.2S (inner surface bumps within +/- 1.6 micrometer)
Use of ultra light and strong aluminum - A7050 which is also used in airplanes.
A I.D.45 piston which is maximum for marketed cars' shock absorber.
A different diameter multi-level valve structure which enables damping effect and specifications adjustment.
The damping effect adjustment structure uses an evolved version of the special shaped needle valve which has already been proven in the HA/NA dampers.
TEIN Suspension Type RA
The type RA allows you control to 1/1000 sec, and to 1 millimeter
S2000 00+ AP1 RA DSH64-P1LS1 10 559 10 559 W/Pillowball
Upper Mount