Mark this thread as Sold
FS: MY07 AP2 Front Bumper/Lip setup
#1
Registered User
Thread Starter
FS: MY07 AP2 Front Bumper/Lip setup
As stated I'm getting ready to part with my front bumper setup. I will be going a different route with it. Here is what I'm selling and the prices:
AP2 Front Bumper - Paint is moderately rock chipped due to a few track days and lots of canyon runs. Does not look bad unless you are a few feet away. I only notice all the chips when i'm washing the car. There is one imperfection near the right brake duct where it seems like someone tried to cut the bumper. Not noticeable from more than 10 ft away. I believe it can be patched up. No grill. I took it out to make the splitter install easier. I liked how it looked so i just threw out the grill
AP2 Front Lip Spoiler - Needs repaint. I went off-track once and scraped up the paint. The lip itself is in good structural condition. Regular unnoticable scrapes on the underside. there are 11 holes drilled on the underside for the splitter to mount and two holes drilled in the top for the splitter stability rods. The holes on top can be shaved easily if you don't get the splitter along with the bumper.
APR CF Splitter - near perfect condition. The holes are already predrilled by me for mounting to you AP2 lip and/or bumper. The underside is a little scraped from normal driving. All bolts and stability rods will be included. This is a VERY durable piece as it's flexible and does not crack under stress. This has done a good job protecting my lip and bumper since i installed it.
PIC on my car:
Will try to get some detailed pics tonight of the imperfections of each piece.
- AP2 Front Bumper - $200
- AP2 Front Lip Spoiler - $200
- APR CF Splitter - $280
- PURCHASED TOGETHER - $600 (Save $80)
AP2 Front Bumper - Paint is moderately rock chipped due to a few track days and lots of canyon runs. Does not look bad unless you are a few feet away. I only notice all the chips when i'm washing the car. There is one imperfection near the right brake duct where it seems like someone tried to cut the bumper. Not noticeable from more than 10 ft away. I believe it can be patched up. No grill. I took it out to make the splitter install easier. I liked how it looked so i just threw out the grill
AP2 Front Lip Spoiler - Needs repaint. I went off-track once and scraped up the paint. The lip itself is in good structural condition. Regular unnoticable scrapes on the underside. there are 11 holes drilled on the underside for the splitter to mount and two holes drilled in the top for the splitter stability rods. The holes on top can be shaved easily if you don't get the splitter along with the bumper.
APR CF Splitter - near perfect condition. The holes are already predrilled by me for mounting to you AP2 lip and/or bumper. The underside is a little scraped from normal driving. All bolts and stability rods will be included. This is a VERY durable piece as it's flexible and does not crack under stress. This has done a good job protecting my lip and bumper since i installed it.
PIC on my car:
Will try to get some detailed pics tonight of the imperfections of each piece.
#3
Registered User
Thread Starter
Originally Posted by jchung,Apr 10 2008, 11:55 AM
Are there holes in the bumper from the metal bars holding up the splitter?