Mark this thread as Sold
FS: Misc turbo items
03-19-2007 | 02:50 PM
#1
Thread Starter
Registered User
Joined: Sep 2005
Posts: 6,790
Likes: 0
FS: Misc turbo items
I have bought almost a complete Full-Race kit and will no longer need several items from my inlinePRO kit. The items and asking prices are as follows:
inlinePRO turbo manifold - $400
inlinePRO down-pipe/dump-tube (dump-tube has been modified such that it internally vents into the down-pipe; this modification can easily be undone if the buyer so chooses to do so) - $250
inlinePRO oil filter relocation kit - $150
Turbosmart 38mm wastegate - $225
These items have less than 1000 miles worth of wear and tear on them. The items will be available starting Saturday, March 31st. I would prefer local pick-up, but will ship them under the right terms.
Disclaimer: For those who don't know, to install the inlinePRO turbo manifold you have to cut out a notch in the frame rail to allow room for the turbo. Also, I had issues with the charge piping detaching from the turbo outlet under boost, so I had an elbow welded to the turbo outlet and the charge pipe modified such that the 90 degree bend was removed and it attaches straight onto the outlet. Turned out great!
inlinePRO turbo manifold - $400
inlinePRO down-pipe/dump-tube (dump-tube has been modified such that it internally vents into the down-pipe; this modification can easily be undone if the buyer so chooses to do so) - $250
inlinePRO oil filter relocation kit - $150
Turbosmart 38mm wastegate - $225
These items have less than 1000 miles worth of wear and tear on them. The items will be available starting Saturday, March 31st. I would prefer local pick-up, but will ship them under the right terms.
Disclaimer: For those who don't know, to install the inlinePRO turbo manifold you have to cut out a notch in the frame rail to allow room for the turbo. Also, I had issues with the charge piping detaching from the turbo outlet under boost, so I had an elbow welded to the turbo outlet and the charge pipe modified such that the 90 degree bend was removed and it attaches straight onto the outlet. Turned out great!
03-20-2007 | 07:24 PM
#4
Registered User
Joined: Sep 2006
Posts: 230
Likes: 0
From: San Diego, CA
Originally Posted by BulldogS2' date='Mar 20 2007, 07:20 PM
if one should purchase all of these, what else would be needed to have a complete turbo kit?
btw, what are your future plans?
btw, what are your future plans?
03-20-2007 | 07:26 PM
#5
Registered User
Joined: Apr 2006
Posts: 1,011
Likes: 0
Originally Posted by crackaonrice' date='Mar 20 2007, 07:24 PM
Intercooler piping, intercooler, blow off valve. Are the only really REQUIRED parts. Other things that should be considered are injectors, fuel pump, filter, EMS maybe.
03-21-2007 | 04:40 AM
#7
Thread Starter
Registered User
Joined: Sep 2005
Posts: 6,790
Likes: 0
Originally Posted by BulldogS2' date='Mar 20 2007, 07:20 PM
btw, what are your future plans?
Trending Topics
03-21-2007 | 04:43 AM
#9
Thread Starter
Registered User
Joined: Sep 2005
Posts: 6,790
Likes: 0
Originally Posted by crackaonrice' date='Mar 21 2007, 04:13 AM
I'm in San Diego as well...what part of town are you in? Would you mind if i came to take a look at them the week of April 2nd?
