jari8378

Buyer flaked, back up for sale.

As the wedding is coming up soon I decided to pull off my kit and sell it.
The kit will be sold with a brand new turbo manifold from Greddy. When i pulled off the kit I had noticed that the manifold developed a small hairline crack. Fortunately I was able to get Greddy to warranty it.

Total miles on the kit: roughly 7k

Complete greddy kit (ap1 or ap2v1)
-turbo 18g
-turbo manifold(new)
-downpipe <-- Already has bung for a wideband
-chargepipes <-- Has adapter plate for HKS SSQV
-Greddy Front mount intercooler(FMIC)
-GREX Oil relocate kit
-Greddy Emanage Ultimate + Harness
-RC injectors w/ clips
-Walbro Fuel Pump<-- its still installed in my car, i'll pull it out once I sell the kit.
-Heat shield for radiator
-Misc bolts and nuts

Extras
-HKS SSQV BOV <-- Love the sound
-Custom EMU mounting plate to the bottom of the Driver seat.
-EMU software and cable.
-AC Heat wrap tape
-I will include my "tuned" maps for an ap1 or the greddy base maps for ap1/ap2
-Used plugs - NGK 2668(less than 400 miles)

Need to swap with buyer
-Oil Pan
If you read the instructions, they use this fitting to return oil through the oil drain bolt. This is not necessarily the safest thing to do as it could cause oil restrictions or back up. My pan is tapped in the correct location for oil return. This will be a free trade between the buyer and I.
-Exhaust Manifold heat shield.
Again if you read the instructions, the "Greddy" method of cutting up the heat shield is very sloppy IMO. I did something different that I think the Buyer will appreciate as it protects the AC lines better.

Its pretty much a complete kit, the only thing you would need is some vacuum hosing and maybe some bolts.

Everything above - $2900 or OBO

Other Items for Sale.
AEM EUGO wideband + wire Harness to link to EMU(for AFR MAP)- $175
Autometer Boost/vaccum gauge - $25
Autometer A-Pillar Dual Gauge Pod + stock a-pillar(you need to cut up your OEM)- $50
Zero-1-Thousand Oil Catch Can- $40 sold
Emanage Boost Pressure Sensor(required if you want to boost 10psi) - $80 sold

If parts need to be shipped, buyer pays pay pal fees + shipping

If the buyer wants it all, we can always work something out. Also if the buyer needs assistance installing the kit(local), I will help at a very in-expensive rate.

PM me or text 909-767-2925

Pictures

all motor eg6

damm 909 area.... hmmmm tempting........ what kind of #were you getting with this kit?

Black_eS

Any bids when it was on your car or dyno #s? Also will this work with DBW?

THESPY

I believe you can use it on 06+ you just have to modify the harness search for ultimate greddy thread in the FI section.

Clean kit = Luis


GLWS


-VLAD

TRBOKEV

Bump for Luis.
Boost is best!

ap2ner daygo

Damn I want, making me want to sell my Oem HT.....glws sexy

jdmjunkie562

Intgrestwd thinking of getting rid of 92 integra gsr for this

dragtek

It can easily work on dbw, but you'll need to get different injectors and a flashpro or kpro. You can easily sale the emanage and injectors to get what u need to run this kit on dbw.

chairmnofthboard

bump

jari8378

When church tuned it and my stock clutch(88k on the OEM) gave out.
@ 7psi I make 220tq and 240whp

He couldnt get a good pull because the clutch kept slipping.

After the clutch upgrade I never took it back for a retune, I just did some street tunning to 10psi and I did adjustments to improve the drivability. So I never had final numbers... Pulled hard.