That was a no brainer Sam . Brembos are so damn small. If they fit the Spoon they will fit/clear Brembo.

If they clear the Endless with a H&R 5mm spacer then they should clear just about any caliper with no spacer.

 

OZ superleggera 18" +45 mm Brembo with no spacers

regarding Prodrive G07 17x7.5 + 44 and Stoptech; the fitment is on the limit. I CC couldn't pass between the Wheel and brake

 

that looks scary haha

 

bump. do the te37's clear the spoon calipers?

 

Will the SW338s with the 45 offset clear the Spoon calipers?

 

yes james.

Also the work emotion 16x7 45 et, like I had

 

The Spoon SW388s 16x7 +35 will clear the Spoon calipers with no spacers. To use the +45 will require a 10mm spacer and extended studs. Thats why you go with the +35 16x7.

 

I really don't get that at all! Surely the higher offset pushes the inner surface of the spokes further outboard.... back to reading the forums on wheel offsets!



I also saw this somewhere on the forum long ago. JDM BBS rims clearing the Spoon Caliper... would this also be with a spacer?

 

Would anyone know if the Spoon calipers will clear Work Meister S2R in size 18"x8" with +51 offset?
How abt the Volk CE28 18"x8", what offset would be needed to clear?

Thanks!

 

nice