Help on what kind of lowering springs I should get
#11
Speaking of which, whats the best coilovers for the set it and forget it crowd. ive been looking at the bilstein pss9 just because the quality seems so high, but i think they might be overkill for someone thats just going to set, corner balance, then probably never mess with them again.
#12
Espelir asd. Drops the car 1.3 inches front and back. A little stiffer than stock springs also. Its the set I'm looking into getting.
I think anything lower than 1.5 inches is gonna have a negative effect on the shocks, but anything higher than that shouldn't be too bad and your shocks shouldn't wear out any faster than normal, unless you're jumping the car or have 400 lbs ladies sitting in it everytime you drive
And I agree with hockey about going with springs and koni yellow setup. When your shocks do go out, just swap em out with koni yellows. By the time the stock shocks do go out, you should have enough money saved up to get the konis
GL on your setup choice
I think anything lower than 1.5 inches is gonna have a negative effect on the shocks, but anything higher than that shouldn't be too bad and your shocks shouldn't wear out any faster than normal, unless you're jumping the car or have 400 lbs ladies sitting in it everytime you drive
And I agree with hockey about going with springs and koni yellow setup. When your shocks do go out, just swap em out with koni yellows. By the time the stock shocks do go out, you should have enough money saved up to get the konis
GL on your setup choice
#13
Registered User
Originally Posted by flush,Oct 11 2007, 09:40 AM
Speaking of which, whats the best coilovers for the set it and forget it crowd. ive been looking at the bilstein pss9 just because the quality seems so high, but i think they might be overkill for someone thats just going to set, corner balance, then probably never mess with them again.
Just do what I tell John...cut your OEM springs
#16
Registered User
Originally Posted by SOLE2K,Oct 11 2007, 01:51 PM
thanks for all the great inputs...now i have some type of ideas but as far as full coilovers, how much do those run?