Only the best for the S
#1
Registered User
Thread Starter
Only the best for the S
Yay! I haz mo' stuff!
Probably will get around to using it all in the a few weeks, my weekends are kinda full at the moment. While not swissvax or anything spectacular, I took Phil's recommendations and ran with them. Many thanks for all the professional opinions and suggestions. Big to detailers domain.
Probably will get around to using it all in the a few weeks, my weekends are kinda full at the moment. While not swissvax or anything spectacular, I took Phil's recommendations and ran with them. Many thanks for all the professional opinions and suggestions. Big to detailers domain.
#5
Registered User
Thread Starter
Now my question is...how do I get an even amount of product on a 6.5" pad from that 3.5" hole?
#6
Registered User
^^^
I invert the Lusso Oro container onto the pad and make 2-3 circular passes with light pressure, seems to work well for me. A little goes a long way and thin coats are best.
I invert the Lusso Oro container onto the pad and make 2-3 circular passes with light pressure, seems to work well for me. A little goes a long way and thin coats are best.
#7
Registered User
Thread Starter
That's what I keep hearing...so in the heat of day, if I invert the container it will start to slide out?
Trending Topics
#8
Registered User
Correct, mine stays loose within the container so it easily falls out onto the pad. Also, I already have the pad attached to the R/O so it's ready to go after application.
#9
Registered User
You can't go wrong when you explain to Phil what you want to achieve, then purchase what he recommends. If you want top-dollar show car results, he can advise you; if you want "just shinier than the other cars in the parking lot" he can set you up. The man is good...
#10
Registered User
Thread Starter
Well the gf is gone for a week and a half...maybe I could fit this in over 3-4 days 2-3 hours per day