100% of defects
#11
To me a pass is one complete use of the product on an area. For example, I use a blue edge pad with some xmt 3 on a fender. I work the fender until the product is used up. That is one pass. If it still looks like it needs more work, I'll repeat the process making that pass 2.
#12
Registered User
Join Date: Jan 2006
Location: Ohio
Posts: 1,113
Likes: 0
Received 0 Likes
on
0 Posts
What I mean by a pass is going over it until the compound breaks down.
Usually takes about 4 mins per panel. I go really slow with slight pressure when using Menz IP and yellow... a bit faster and less pressure with PO106FA and orange.. aand a bit faster with just weight of the PC when using PO106FA.
Usually takes about 4 mins per panel. I go really slow with slight pressure when using Menz IP and yellow... a bit faster and less pressure with PO106FA and orange.. aand a bit faster with just weight of the PC when using PO106FA.
Thread
Thread Starter
Forum
Replies
Last Post
TheSpeedRacer
S2000 Wash and Wax
6
08-12-2008 12:37 AM